MODIFICATION OF COMPOSITE MATERIAL FILLERS BY ATMOSPHERIC PLASMA DISCHARGE

被引：0
|
作者：
Tichy, David [1 ]
Hajkova, Pavlina [2 ]
机构：
[1] Tech Univ Liberec, Dept Mat Sci, Studentska 2, Liberec 46117, Czech Republic
[2] Res Inst Inorgan Chem, Usti Nad Labem 40001, Czech Republic
来源：
ACTA POLYTECHNICA | 2013年 / 53卷 / 02期
关键词：
atmospheric plasma; dielectric barrier discharge; glass textiles; basalt textiles; wettability;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This work is focused on the observation of the influence of cold atmospheric dielectric barrier discharge (DBD) on a modification of textile samples. The main objective of the experiment is to research wettability change of textiles modified by different exposure times and also the observation of the influence of a modification ageing effect. An ambient air was used as a working gas for DBD plasma. The wettability evaluation was carried out by a drop method, in which an imprint of the drop was observed on the textile surface during various time intervals. An ageing effect of the modification was monitored within an interval of 28 days. Considerable increase of wettability of all modified samples has been proved. A fibre surface analysis was carried out by means of SEM.
引用
收藏
页码：237 / 240
页数：4
相关论文
共 50 条
  • [1] Investigation of atmospheric pressure plasma discharge and its application to surface modification of blood-filtering material
    Tang, XL
    Feng, XP
    Qiu, G
    Yan, YH
    Shi, YC
    [J]. PLASMA SCIENCE & TECHNOLOGY, 2004, 6 (05) : 2463 - 2466
  • [2] Organic and Bio material Surface Modification via Corona Discharge induced Atmospheric-Cold Plasma
    Khamsen, Natthaporn
    Akkarachanchainon, Aric
    Teerakawanich, Nithiphat
    Srisonphan, Siwapon
    [J]. 2016 INTERNATIONAL ELECTRICAL ENGINEERING CONGRESS, IEECON2016, 2016, : 325 - 328
  • [3] Investigation of Atmospheric Pressure Plasma Discharge and Its Application to Surface Modification of Blood-Filtering Material
    唐晓亮
    冯贤平
    邱高
    闫永辉
    施芸城
    [J]. Plasma Science and Technology, 2004, (05) : 2463 - 2466
  • [4] Surface Modification of Polymeric Material Using Atmospheric Plasma
    Sim, Dong Hyun
    Seul, Soo Duk
    [J]. POLYMER-KOREA, 2008, 32 (05) : 433 - 439
  • [5] APPLICATION OF ATMOSPHERIC DIELECTRIC BARRIER DISCHARGE PLASMA FOR POLYETHYLENE POWDER MODIFICATION
    Pichal, J.
    Hladik, J.
    Spatenka, P.
    Aubrecht, L.
    [J]. PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY, 2006, (06): : 192 - 194
  • [6] Modification of Surface of Reinforcing Carbon Fillers for Polymeric Composite Materials by Plasma Treatment (Review)
    Sidorina, A. I.
    Gunyaeva, A. G.
    [J]. FIBRE CHEMISTRY, 2017, 49 (01) : 24 - 27
  • [7] Modification of Surface of Reinforcing Carbon Fillers for Polymeric Composite Materials by Plasma Treatment (Review)
    A. I. Sidorina
    A. G. Gunyaeva
    [J]. Fibre Chemistry, 2017, 49 : 24 - 27
  • [8] Modification of Silicon Carbide Surfaces by Atmospheric Pressure Plasma for Composite Applications
    Rodriguez-Santiago, Victor
    Vargas-Gonzalez, Lionel
    Bujanda, Andres A.
    Baeza, Jose A.
    Fleischman, Michelle S.
    Yim, Jacqueline H.
    Pappas, Daphne D.
    [J]. ACS APPLIED MATERIALS & INTERFACES, 2013, 5 (11) : 4725 - 4730
  • [9] Surface Modification of Cu by Atmospheric Pressure Plasma Jet for Micro Discharge Inhibition
    CUI Chaochao
    ZHANG Cheng
    REN Chengyan
    GAO Yuan
    CHEN Genyong
    SHAO Tao
    [J]. 中国电机工程学报, 2018, 38 (05) : 1617 - 1617
  • [10] Modification of the Steel Surface Treated by a Volume Discharge Plasma in Nitrogen at Atmospheric Pressure
    M. V. Erofeev
    M. A. Shulepov
    Yu. F. Ivanov
    K. V. Oskomov
    V. F. Tarasenko
    [J]. Russian Physics Journal, 2016, 58 : 1557 - 1562
12345