CALCIUM MASS-TRANSFER WITH DIALYSATE CONTAINING 1.25 AND 1.75 MMOL/L CALCIUM IN PERITONEAL-DIALYSIS PATIENTS

Studies with 1.75 mmol/L calcium dialysate have shown that patients gain calcium from dialysate. Thus, hypercalcemia, especially when calcium compounds are used for phosphate control, is a commonly seen complication. Dialysate with 1.25 mmol/L calcium has been available since 1989. Little is known about calcium mass transfer (CMT) with dialysate of this calcium concentration. CMT was measured in 20 stable adult peritoneal dialysis patients. Each CMT study consisted of a 2-L continuous ambulatory peritoneal dialysis (CAPD) exchange with a dwell time of 4 hours. CMT studies were performed using 1.25 and 1.75 mmol/L calcium dialysate with 1.5, 2.5, and 4.25 g/dL dextrose concentrations. CMT with 1.25 mmol/L calcium dialysate was compared to that with 1.75 mmol/L for each dextrose concentration. With a dextrose concentration of 1.5 g/dL, the mean CMT for 1.25 mmol/L calcium dialysate was —0.1 ± 0.3 mmol versus 0.6 ± 0.3 mmol for 1.75 mmol/L calcium dialysate (P < 0.0001). A dextrose concentration of 2.5 gl dL resulted in a mean CMT of —0.4 ± 0.2 mmol for 1.25 mmol/L calcium versus 0.45 ± 0.25 mmol for 1.75 mmol/L calcium (P < 0.0001). Using a dextrose concentration of 4.25 g/dL, the mean CMT was —0.7 ± 0.25 mmol for 1.25 mmol/L calcium versus —0.05 ± 0.35 mmol for 1.75 mmol/L calcium (P < 0.0001). Mean serum ionized calcium (SiCa) was between 1.15 and 1.20 mmol/L for all study groups. CMT inversely correlated with SiCa for each type of dialysate used. CMT was dependent on the concentrations of calcium and dextrose in the dialysate and the SiCa level at the time of the exchange. The use of 1.25 mmol/L calcium dialysate, which does not result in calcium gain to the patient, may prove to be useful in preventing hypercalcemia when peritoneal dialysis patients are using calcium salts as phosphate binders. © 1992, National Kidney Foundation, Inc.. All rights reserved.