MULTIAXIAL FATIGUE OF WELDED-JOINTS UNDER IN-PHASE AND OUT-OF-PHASE LOCAL STRAINS AND STRESSES

被引:179
|
作者
SONSINO, CM
机构
[1] Fraunhofer-Institut für Betriebsfestigkeit (LBF), Darmstadt
关键词
WELDED JOINTS; STRUCTURAL STEEL; IN- AND OUT-OF-PHASE CONSTANT-AMPLITUDE LOADING; AXIAL; BENDING AND TORSIONAL LOADING; NOMINAL AND LOCAL STRESSES; STRESS CONCENTRATION; SIZE EFFECT;
D O I
10.1016/0142-1123(95)93051-3
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Welded cruciform-type specimens from fine-grained steel StE 290 and flange-tube as well as tube-tube joints from fine-grained steel StE 460 with unmachined and machined welds were investigated under biaxial constant-amplitude loading in the range 10(3) to 5 x 10(6) cycles to crack initiation and breakthrough respectively. In order not to interfere with residual stresses they were relieved by heat treatment. In-phase loading can be treated fairly well using the conventional hypotheses (von Mises or Tresca) on the basis of nominal, structural or local strains or stresses. But the influence of out-of-phase loading on fatigue life is severely overestimated if conventional hypotheses are used. However, the introduced hypotheses of the effective equivalent stress leads to fairly good predictions. For this, knowledge of local strains or stresses is necessary. They are determined by boundary-element analyses dependent on weld geometry. This hypothesis considers the influence of out-of-phase loading by taking into account the interaction of local shear stresses acting in different surface planes of the material. Further, size effects resulting from weld geometry and loading mode are included.
引用
收藏
页码:55 / 70
页数:16
相关论文
共 50 条
  • [2] IN-PHASE AND OUT-OF-PHASE MULTIAXIAL FATIGUE
    ELLYIN, F
    GOLOS, K
    XIA, Z
    [J]. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1991, 113 (01): : 112 - 118
  • [3] Differences in the response to in-phase and out-of-phase multiaxial high-cycle fatigue loading
    Papuga, Jan
    Nesladek, Martin
    Kuzelka, Jiri
    Jurenka, Josef
    [J]. FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY, 2019, 13 (50): : 163 - 183
  • [4] Fatigue crack propagation under in-phase and out-of-phase biaxial loading
    Neerukatti, R. K.
    Datta, S.
    Chattopadhyay, A.
    Iyyer, N.
    Phan, N.
    [J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2018, 41 (02) : 387 - 399
  • [5] Fatigue resistance of pipe-to-plate welded joint under in-phase and out-of-phase combined bending and torsion
    Frendo, Francesco
    Bertini, Leonardo
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2015, 79 : 46 - 53
  • [6] Multiaxial fatigue life estimations for 6082-T6 cylindrical specimens under in-phase and out-of-phase biaxial loadings
    Susmel, L
    Petrone, N
    [J]. BIAXIAL/MULTIAXIAL FATIGUE AND FRACTURE, 2003, 31 : 83 - 104
  • [7] Prediction of crack initiation plane direction in high-cycle multiaxial fatigue with in-phase and out-of-phase loading
    Lu, C.
    Melendez, J.
    Martinez-Esnaola, J. M.
    [J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2017, 40 (12) : 1994 - 2007
  • [8] Fatigue thresholds of holed components under in-phase and out-of-phase torsional and axial loadings
    Tanaka, K.
    Morita, K.
    Akiniwa, Y.
    [J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2008, 31 (12) : 1079 - 1090
  • [9] A new multiaxial fatigue life and crack growth rate model for various in-phase and out-of-phase strain paths
    Varvani-Farahani, A
    Topper, TH
    [J]. MULTIAXIAL FATIGUE AND DEFORMATION: TESTING AND PREDICTION, 2000, 1387 : 305 - 322
  • [10] A new multiaxial fatigue life and crack growth rate model for various in-phase and out-of-phase strain paths
    Varvani-Farahani, A.
    Topper, T.H.
    [J]. ASTM Special Technical Publication, 2000, (1387): : 305 - 322