THEORETICAL-ANALYSIS OF RIBBON FORMATION BY PLANAR FLOW CASTING

被引：0
|
作者：
KUBICAR, L
ADAMISOVA, S
机构：
来源：
INTERNATIONAL JOURNAL OF RAPID SOLIDIFICATION | 1995年 / 8卷 / 04期
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Two models of ribbon formation by Planar Flow Casting are analyzed, namely that of a molten layer on a cold substrate and that of a basin with a cold bottom. The theoretical analysis has shown that the control parameters for ribbon formation are the time period during which the solidification front penetrates into the melt, the temperature gradient inside the melt, and the latent heat. The correlation between the control parameters and the technical parameters of the ribbon casting is discussed. The theoretical predictions are compared with experimental fact.
引用
收藏
页码：281 / 313
页数：33
相关论文
共 50 条
  • [1] MODELING OF DENDRITIC GROWTH DURING RIBBON FORMATION IN PLANAR FLOW CASTING
    LUDWIG, A
    FROMMEYER, G
    GRANASY, L
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 133 : 722 - 725
  • [2] THEORETICAL-ANALYSIS OF RIBBON THICKNESS FORMATION DURING MELT-SPINNING
    KATGERMAN, L
    [J]. SCRIPTA METALLURGICA, 1980, 14 (08): : 861 - 864
  • [3] MODELING OF CRYSTAL-GROWTH DURING THE RIBBON FORMATION IN PLANAR FLOW CASTING
    LUDWIG, A
    FROMMEYER, G
    GRANASY, L
    [J]. STEEL RESEARCH, 1990, 61 (10): : 467 - 471
  • [4] Effect of surface roughness of chill wheel on ribbon formation in the planar flow casting process
    Su, Yu-Guang
    Chen, Falin
    Wu, Chung-Yung
    Chang, Min-Hsing
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 229 : 609 - 613
  • [5] THEORETICAL-ANALYSIS OF HEAT-FLOW IN HORIZONTAL RIBBON GROWTH FROM A MELT
    ZOUTENDYK, JA
    [J]. JOURNAL OF APPLIED PHYSICS, 1978, 49 (07) : 3927 - 3932
  • [6] Reimann Brake Ramp for planar flow casting processes and analysis of ribbon gluing
    Marot, Laurent
    Jakob, Silvester
    Martina, Marco
    Reimann, Peter
    Breitenstein, Heinz
    Steinacher, Michael
    Meyer, Ernst
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 16 : 734 - 742
  • [7] AN ANALYSIS OF THE DEPENDENCE BETWEEN THE RIBBON DIMENSIONS AND THE TECHNOLOGICAL PARAMETERS FOR THE PLANAR FLOW CASTING METHOD
    ANESTIEV, LA
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 131 (01): : 115 - 121
  • [8] THEORETICAL-ANALYSIS AND MODEL EXPERIMENTS ON ELECTROMAGNETICALLY DRIVEN FLOW IN CONTINUOUS-CASTING
    ASAI, S
    NISHIO, N
    MUCHI, I
    [J]. TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1982, 22 (02) : 126 - 133
  • [9] THEORETICAL-ANALYSIS OF AIRCRAFT AFTERBODY FLOW
    DEIWERT, GS
    ANDREWS, AE
    NAKAHASHI, K
    [J]. JOURNAL OF SPACECRAFT AND ROCKETS, 1987, 24 (06) : 496 - 503
  • [10] A THEORETICAL-ANALYSIS OF VERTICAL FLOW EQUILIBRIUM
    YORTSOS, YC
    [J]. TRANSPORT IN POROUS MEDIA, 1995, 18 (02) : 107 - 129
12345