EXPERIMENTAL-DETERMINATION OF STRESS INTENSITY FACTORS FOR CRACKS IN TURBINE DISKS

Stage-II fatigue crack growth paths in firtree fixtures have been predicted using a photoelastic technique. Initiation was assumed to occur at the edge of contact on the load-bearing flanks and, subsequently, the cracks were extended in the direction of the maximum circumferential stress. After a short initial length, in which propagation was perpendicular to the contact surface, the direction of crack growth was, in a broad sense, equivalent to the hoop direction in the disc. Stress intensity factors were found for the majority of the crack path using data taken from the isochromatic fringe patterns. It was concluded that the most catastrophic failure was likely to occur from the innermost land of the firtree and that the width of the firtree had little influence on the stress intensity factors.