Simulation of Temperature Controller for an Injection Mould Machine using Fuzzy Logic

被引：2

作者：

Mashhadi, Seyed Kamaleddin Mousavi ^{[1
]}

Savzevar, Mehdi Zahiri ^{[2
]}

Yekan, Jamal Ghobadi Dizaj ^{[2
]}

机构：

[1] Iran Univ Sci & Technol, Sch Elect Engn, Tehran, Iran

[2] Khorasan Inst Higher Educ, Mashhad, Iran

来源：

JOURNAL OF MATHEMATICS AND COMPUTER SCIENCE-JMCS | 2013年 / 7卷 / 01期

关键词：

Fuzzy-PID; Temperature Control; Fuzzy Controller; PID Controller;

D O I：

10.22436/jmcs.07.01.04

中图分类号：

O1 [数学];

学科分类号：

0701 ; 070101 ;

摘要：

This research introduces a method for designing a linear fuzzy controller to control the temperature in an injection mould machine. First, a time-delay system is introduced as the temperature control system. The fuzzy controller system is composed of a heater transfer function controller and a decision maker. Both the controller and the decision maker are designed using fuzzy logic, and simulated in MATLAB. For facilitating the implementation of the fuzzy circuit, a linear equation is estimated from fuzzy equations using regression method, and its response is compared to that of the fuzzy controller. Finally, a PID controller is designed and its response is compared to the response of the fuzzy system.

引用

页码：33 / 42

页数：10

共 50 条

[1] Simulation on temperature fuzzy control in injection mould machine by simulink
Zhou, Hongfu
[J]. PROCEEDINGS OF 2008 IEEE INTERNATIONAL CONFERENCE ON NETWORKING, SENSING AND CONTROL, VOLS 1 AND 2, 2008, : 123 - 128
[2] Design and Simulation of Washing Machine using Fuzzy Logic Controller (FLC)
Wulandari, N.
Abdullah, A. G.
[J]. INTERNATIONAL SYMPOSIUM ON MATERIALS AND ELECTRICAL ENGINEERING (ISMEE) 2017, 2018, 384
[3] Application of Matrix Fuzzy Logic in Machine Independent Temperature Controller
Seletkov, Ilya P.
Yasnitsky, Leonid N.
[J]. DIGITAL SCIENCE, 2019, 850 : 443 - 449
[4] Fuzzy logic temperature controller
Qiao Juyao
Xiu Guoyi
Sun Guang
[J]. 7th International Conference on Measurement and Control of Granular Materials, Proceedings, 2006, : 342 - 345
[5] A fuzzy logic controller for synchronous machine
Aissaoui, Abdel Ghani
Abid, Mohamed
Abid, Hamza
Tahour, Ahmed
Zeblah, Abdel Kader
[J]. JOURNAL OF ELECTRICAL ENGINEERING-ELEKTROTECHNICKY CASOPIS, 2007, 58 (05): : 285 - 290
[6] Fuzzy logic controller for a retrofitted closed-loop injection moulding machine
Huang, SJ
Lee, TH
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING, 2000, 214 (I1) : 9 - 21
[7] Modeling and Simulation of a Photovoltaic System using Fuzzy Logic Controller
Lalouni, Sofia
Rekioua, Djamila
[J]. 2009 SECOND INTERNATIONAL CONFERENCE ON DEVELOPMENTS IN ESYSTEMS ENGINEERING (DESE 2009), 2009, : 23 - 28
[8] A fuzzy logic controller for injection ram velocity
Tsoi, HP
Gao, FR
[J]. CONFERENCE PROCEEDINGS AT ANTEC '98: PLASTICS ON MY MIND, VOLS I-3: VOL I; PROCESSING, VOL II; SPECIAL AREAS, VOL III; MATERIALS, 1998, 44 : 641 - 644
[9] Fuzzy logic based temperature controller
Kaur, G
Chauhan, A
Subramanyam, PV
[J]. 2005 IEEE International Conference on Granular Computing, Vols 1 and 2, 2005, : 492 - 495
[10] Architecture on clamping motors synchronized controller in injection mould machine
Zhou, Hongfu
[J]. 2007 IEEE INTERNATIONAL CONFERENCE ON CONTROL AND AUTOMATION, VOLS 1-7, 2007, : 274 - 278

← 1 2 3 4 5 →