EFFECT OF ELECTROLYTE TEMPERATURE ON THE THICKNESS OF ANODIC ALUMINIUM OXIDE (AAO) LAYER

被引：0

作者：

Michal, P. ^{[1
]}

Vagaska, A. ^{[2
]}

Fechova, E. ^{[2
]}

Gombar, M. ^{[1
]}

Kozak, D. ^{[3
]}

机构：

[1] Inst Technol & Businesses Ceske Budejovice, Ceske Budejovice, Czech Republic

[2] Tech Univ Kosice, Fac Mfg Technol Seat Presov, Kosice, Slovakia

[3] JJ Strossmayer Univ Osijek, Mech Engn Fac Slavonski Brod, Osijek, Croatia

来源：

METALURGIJA | 2016年 / 55卷 / 03期

关键词：

anodic aluminium oxide (AAO); layer thickness; electrolyte; temperature; oxidation;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Effect of electrolyte temperature on the thickness of resulting oxide layer has been studied. Unlike previous published studies this article was aimed to monitor the relationship between electrolyte temperature and resulting AAO layer thickness in interaction with other input factors affecting during anodizing process under special process condition, i.e. lower concentration of sulphuric acid, oxalic acid, boric acid and sodium chloride. According to Design of Experiments (DOE) 80 individual test runs of experiment were carried out. Using statistical analysis and artificial intelligence for evaluation, the computational model predicting the thickness of oxide layer in the range from 5 / mu m to 15 / mu m with tolerance +/- 0,5 / mu m was developed.

引用

页码：403 / 406

页数：4

共 50 条

[1] Effect of Electrolyte Concentration on the Growth of Porous Anodic Aluminium Oxide (AAO) on Al-Mn Alloys
Voon, C. H.
Derman, M. N.
[J]. ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 2012, 626 : 610 - 614
[2] Effect of the Electrolyte Temperature and the Current Density on a Layer Microhardness Generated by the Anodic Aluminium Oxidation
Spisak, Emil
Gombar, Miroslav
Kmec, Jan
Vagaska, Alena
Fechova, Erika
Michal, Peter
Pitel', Jan
Kucerka, Daniel
[J]. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2015, 2015
[3] Effect of Sealing on Thermal Conductivity of Aluminium Anodic Oxide Layer
Lee, Junghoon
Kim, Yonghwan
Kim, Junho
Chung, Wonsub
[J]. JOURNAL OF NANOELECTRONICS AND OPTOELECTRONICS, 2014, 9 (01) : 136 - 140
[4] Effect of processing parameters on pore structure and thickness of anodic aluminum oxide (AAO) tubular membranes
Belwalkar, A.
Grasing, E.
Van Geertruyden, W.
Huang, Z.
Misiolek, W. Z.
[J]. JOURNAL OF MEMBRANE SCIENCE, 2008, 319 (1-2) : 192 - 198
[5] Reflective interferometric gas sensing using nanoporous anodic aluminium oxide (AAO)
Kumeria, Tushar
Losic, Dusan
[J]. PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS, 2011, 5 (10-11): : 406 - 408
[6] THICKNESS AND OPTICAL PROPERTIES OF FILMS OF ANODIC ALUMINIUM OXIDE
KHAN, IH
LEACH, JSL
WILKINS, NJM
[J]. CORROSION SCIENCE, 1966, 6 (11-1) : 483 - &
[7] Effect of Various Electrolyte Modifiers on Anodic Alumina (AAO) Growth and Morphology
Norek, Malgorzata
Budner, Boguslaw
[J]. CURRENT NANOSCIENCE, 2019, 15 (01) : 76 - 83
[8] Ionic Current Rectification of Porous Anodic Aluminum Oxide (AAO) with a Barrier Oxide Layer
Kim, Yun Do
Choi, Seungwook
Kim, Ansoon
Lee, Woo
[J]. ACS NANO, 2020, 14 (10) : 13727 - 13738
[9] Review of porous anodic aluminium oxide (AAO) applications for sensors, MEMS and biomedical devices
Ali, H. O.
[J]. TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2017, 95 (06): : 290 - 296
[10] High-temperature annealing of porous anodic aluminium oxide prepared in selenic acid electrolyte
Roslyakov, I. V.
Shirin, N. A.
Evdokimov, P. V.
Berekchiian, M. V.
Simonenko, N. P.
Lyskov, N. V.
Napolskii, K. S.
[J]. SURFACE & COATINGS TECHNOLOGY, 2022, 433

← 1 2 3 4 5 →