INVESTIGATION OF THE INFLUENCE OF MOLD ROTATIONAL SPEED ON THE CAST WALL THICKNESS IN THE ROTATIONAL MOLDING PROCESS

被引：2
|
作者：
Jachowicz, Tomasz [1 ]
Sikora, Janusz W. [1 ]
机构：
[1] Lublin Univ Technol, Mech Engn Fac, Dept Polymer Proc, 36 Nadbystrzycka Str, PL-20618 Lublin, Poland
来源：
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL | 2013年 / 7卷 / 19期
关键词：
rotational molding process; mold rotational speed; polymer cast;
D O I：
10.5604/20804075.1062380
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents the rotational molding process. The general principles of this polymer processing technology have been described. The main applications have been introduced and leading advantages and typical disadvantages of rotational molding process have been discussed. Based on the conducted experimental tests, the influence of changing one selected technological parameter, which characterized rotational molding process, on selected geometrical features of the polymer cast has been determined. Rotational mold's speed around axes was changed and a thickness of cast walls has been measured. Laboratory test stand, processing properties of polymer, also test program and experimental test methodology have been described.
引用
收藏
页码：79 / 87
页数：9
相关论文
共 50 条
  • [1] Cycle time predictions for the rotational molding process with and without mold/part separation
    University of Nebraska-Lincoln, Department of Mechanical Engineering, N104 Walter Scott Engineering Center, Lincoln, NE 68588-0656, United States
    Polym Eng Sci, 4 (617-629):
  • [2] Cycle time predictions for the rotational molding process with and without mold/part separation
    Gogos, G
    Liu, X
    Olson, LG
    CONFERENCE PROCEEDINGS AT ANTEC '98: PLASTICS ON MY MIND, VOLS I-3: VOL I; PROCESSING, VOL II; SPECIAL AREAS, VOL III; MATERIALS, 1998, 44 : 1133 - 1136
  • [3] Cycle time predictions for the rotational molding process with and without mold part separation
    Gogos, G
    Liu, X
    Olson, LG
    POLYMER ENGINEERING AND SCIENCE, 1999, 39 (04): : 617 - 629
  • [4] Effect of mold rotation speed on the cast wall thickness during rotomoulding
    Jachowicz, Tomasz
    PRZEMYSL CHEMICZNY, 2013, 92 (07): : 1296 - 1299
  • [5] Experimental and Numerical Analysis of Mold Filling in Rotational Molding
    Nieschlag, Jonas
    Seuffert, Julian
    Strack, Daniel
    Friedmann, Marco
    Kaerger, Luise
    Henning, Frank
    Fleischer, Juergen
    JOURNAL OF COMPOSITES SCIENCE, 2021, 5 (11):
  • [6] Optimization and modelling of rotational molding process
    Perot, E.
    Lamnawar, K.
    Maazouz, A.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 783 - 786
  • [7] Optimization and modelling of rotational molding process
    E. Perot
    K. Lamnawar
    A. Maazouz
    International Journal of Material Forming, 2008, 1 : 783 - 786
  • [8] The Design and the Process Technology of a Rotational Mold
    Pop, Alina Bianca
    Pop, Gheorghe Ioan
    Titu, Mihail Aurel
    MODERN TECHNOLOGIES IN MANUFACTURING (MTEM 2019), 2019, 299
  • [9] Influence of mold pressurization on cycle time in rotational molding composites with welded ignimbrite as loading
    Ortega, Zaida
    Douglas, Paula
    Hanna, Paul R.
    Kelly-Walley, Jake
    Mccourt, Mark
    COMPOSITES COMMUNICATIONS, 2024, 45
  • [10] Investigation of tensile properties of polymeric nanocomposite samples in the rotational molding process
    Mahsa Daryadel
    Taher Azdast
    Mohamad Khatami
    Milad Moradian
    Polymer Bulletin, 2021, 78 : 2465 - 2481
12345