INFLUENCE OF SPACE HOLDER ON RHEOLOGICAL BEHAVIOR OF COPPER FEEDSTOCKS FOR METAL INJECTION MOLDING

被引：0

作者：

Bahrin, Mohammad Dahar Kamal ^{[1
]}

Wahab, Nor 'Aini ^{[1
]}

Nordin, Nor Amalina ^{[1
]}

Ismail, Muhammad Hussain ^{[1
]}

Ahmad, Ismail Nasiruddin ^{[1
]}

机构：

[1] Univ Teknol MARA, Fak Kejuruteraan Mekanikal, Ctr Adv Mat Res CAMAR, Selangor, Malaysia

来源：

JURNAL TEKNOLOGI | 2015年 / 76卷 / 06期

关键词：

Metal injection molding; copper; rheological behavior; viscosity; flow behavior index; activation energy;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The characterization of MIM feedstock consisting of 63 vol% of copper powder with a binder system consisting of palm stearin ( PS) and low density polyethylene (LDPE) was studied. To achieve porous structure, sodium chloride (NaCl) was added as a space holder. The effect of shear rate (s(-1)), temperature (degrees C) and viscosity (Pa.s) on the rheological behavior of solid and porous copper feedstocks were investigated by using the Rosand RH2000 Capillary Rheometer at temperatures of 160, 170 and 180 degrees C. The feedstocks achieved desirable injection molding characteristics such as pseudo-plastic behaviour, stable flow, flow behavior index less than 1 (n<1) and low activation energy (E). It can be concluded from the analysis that both feedstocks showed a good pseudo-plastic behavior within acceptable ranges in MIM.

引用

页码：91 / 95

页数：5

共 50 条

[1] Rheological Behavior of Carbon Nanotubes/Copper Feedstocks for Metal Injection Molding
Ahmad, Faiz
Muhsan, Ali Samer
Raza, M. Rafi
[J]. MEMS, NANO AND SMART SYSTEMS, PTS 1-6, 2012, 403-408 : 5335 - 5340
[2] RHEOLOGICAL CHARACTERIZATION OF FEEDSTOCKS FOR METAL INJECTION-MOLDING
WRIGHT, M
HUGHES, LJ
GRESSEL, SH
[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 1994, 3 (02) : 300 - 306
[3] Analysis of the rheological behavior of copper metal injection molding (MIM) feedstock
Jabir, S. Muhammad
Noorsyakirah, A.
Afian, O. Mohd
Nurazilah, M. Z.
Aswad, M. Ahmad
Afiq, N. H. Mohd
Mazlan, M.
[J]. 5TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MINERALS AND ENVIRONMENT (RAMM) & 2ND INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERAL AND POLYMER (MAMIP), 2016, 19 : 148 - 152
[4] Rheological Characterization of Powder Mixture Including a Space Holder and Its Application to Metal Injection Molding
Park, Sang June
Kim, Dongyeong
Lin, Dongguo
Park, Seong Jin
Ahn, Seokyoung
[J]. METALS, 2017, 7 (04):
[5] Effects of PEG molecular weights on rheological behavior of alumina injection molding feedstocks
Yang, WW
Yang, KY
Hon, MH
[J]. MATERIALS CHEMISTRY AND PHYSICS, 2003, 78 (02) : 416 - 424
[6] Metal powders and feedstocks for metal injection molding
[J]. Kulkarni, Kishor M., 2000, American Powder Metallurgy Inst, Princeton, NJ, United States (36):
[7] Metal powders and feedstocks for metal injection molding
Kulkarni, KM
[J]. INTERNATIONAL JOURNAL OF POWDER METALLURGY, 2000, 36 (03): : 43 - 52
[8] Application of Potassium Carbonate as Space Holder for Metal Injection Molding Process of Open Pore Copper Foam
Noorsyakirah, A.
Mazlan, M.
Afian, O. Mohd
Aswad, M. Ahmad
Jabir, S. Muhammad
Nurazilah, M. Z.
Afiq, N. H. Mohd
Bakar, M.
Nizam, A. J. Mohd
Zahid, O. Ahmad
Bakri, M. H. Mohd
[J]. 5TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MINERALS AND ENVIRONMENT (RAMM) & 2ND INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERAL AND POLYMER (MAMIP), 2016, 19 : 552 - 557
[9] Effect of Powder Shape on Rheological Properties of Tungsten Feedstocks for Metal Powder Injection Molding
Hu Ke
Yang Shisong
Zou Liming
Han Shengli
Cui Liqun
Liu Xin
[J]. RARE METAL MATERIALS AND ENGINEERING, 2020, 49 (10) : 3472 - 3478
[10] Effect of Powder Shape on Rheological Properties of Tungsten Feedstocks for Metal Powder Injection Molding
粉末粒形对钨粉末注射成形喂料流变性能的影响
[J]. Liu, Xin (shaneliu118@163.com), 1600, Science Press (49): : 3472 - 3478

← 1 2 3 4 5 →