A PIEZOELECTRIC SENSOR FOR IN-SITU MONITORING OF XEROGRAPHIC DEVELOPERS

被引：0
|
作者：
RIMAI, DS
ZARETSKY, MC
PRIMERANO, B
LAUKALTIS, JF
机构：
来源：
JOURNAL OF IMAGING SCIENCE AND TECHNOLOGY | 1995年 / 39卷 / 02期
关键词：
D O I：
暂无
中图分类号：
TB8 [摄影技术];
学科分类号：
0804 ;
摘要：
A novel approach to characterizing the mass deposition rate and determining the charge-to-mass ratio for a toner within a xerographic development station is presented. This technique consists of suspending a biased piezoelectric transducer in the developer and simultaneously measuring the frequency shift of the transducer and the toning current to the biased electrode. After the measurement step, the sign of the bias on the transducer is reversed, thereby removing the toner and readying the device for the next measurement. Results were obtained by using a 1-MHz, AT-cut quartz transducer and measuring its response to variations in toner size and charge-to-mass ratio for a two-component development system.
引用
收藏
页码：136 / 141
页数：6
相关论文
共 50 条
  • [1] Simulation and implementation of a piezoelectric sensor for harmonic in-situ strain monitoring
    Incandela, O.
    Goujon, L.
    Barthod, C.
    [J]. JOURNAL OF VIBROENGINEERING, 2009, 11 (01) : 130 - 139
  • [2] Feasibility of in-situ health monitoring for composite structure with embedded piezoelectric sensor networks
    Vo, Khanh T. V.
    Padma, Sriram Ravisankar
    Ngin, Eric C. S.
    Shankar, Sridharan Vijay
    Li, Hua
    Idapalapati, Sridhar
    [J]. INTERNATIONAL CONFERENCE ON OPTICAL AND PHOTONIC ENGINEERING, ICOPEN 2023, 2024, 13069
  • [3] In-situ monitoring of liquid composite molding process using piezoelectric sensor network
    Qing, Xinlin
    Liu, Xiao
    Zhu, Jianjian
    Wang, Yishou
    [J]. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 2021, 20 (05): : 2840 - 2852
  • [4] Piezoelectric sensor for in-situ measurement of stress intensity factors
    Baecker, D.
    Haeusler, C.
    Kuna, M.
    [J]. SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2011, 2011, 7981
  • [5] Lamb wave tuning for piezoelectric wafer active sensor applications in in-situ structural health monitoring
    Giurgiutiu, V.
    Yu, L.
    Santoni, G. B.
    Xu, B.
    [J]. REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 27A AND 27B, 2008, 975 : 896 - 903
  • [6] A micromachined sensor for in-situ monitoring of plasma etching
    Baker, MD
    Brand, O
    Allen, MG
    May, GS
    [J]. 1996 54TH ANNUAL DEVICE RESEARCH CONFERENCE DIGEST, 1996, : 120 - 121
  • [7] Oceanographic Sensor for in-situ temperature and conductivity monitoring
    Gong, Weidong
    Mowlem, Matt
    Kraft, Michael
    Morgan, Hywel
    [J]. OCEANS 2008 - MTS/IEEE KOBE TECHNO-OCEAN, VOLS 1-3, 2008, : 42 - +
  • [8] Wireless crackwire sensor for in-situ engine monitoring
    Gerardi, JJ
    Archambault, J
    Brooks, WG
    [J]. 2003 IEEE AEROSPACE CONFERENCE PROCEEDINGS, VOLS 1-8, 2003, : 3045 - 3052
  • [9] In-situ cure monitoring of thick CFRP using multifunctional piezoelectric-fiber hybrid sensor network
    Yu, Yinghong
    Liu, Xiao
    Cui, Xiyue
    Wang, Yishou
    Qing, Xinlin
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2023, 240
  • [10] SewerSnort: A Drifting Sensor for In-situ Sewer Gas Monitoring
    Kim, Jihyoung
    Lim, June Soo
    Friedman, Jonathan
    Lee, Uichin
    Vieira, Luiz
    Rosso, Diego
    Gerla, Mario
    Srivastava, Mani B.
    [J]. 2009 6TH ANNUAL IEEE COMMUNICATIONS SOCIETY CONFERENCE ON SENSOR, MESH AND AD HOC COMMUNICATIONS AND NETWORKS (SECON 2009), 2009, : 691 - +
12345