High-Precision Machining by Measuring and Compensating the Error Motion of Spindle's Axis of Rotation in Radial Direction

被引:0
|
作者
Sarhan, Ahmed A. D. [1 ]
Hassan, M. A. [1 ]
Matsubara, Atsushi [2 ]
Hamdi, M. [1 ]
机构
[1] Univ Malaya, Dept Engn Design & Mfg, Fac Engn, Ctr Adv Mfg & Mat Proc, Kuala Lumpur 50603, Malaysia
[2] Kyoto Univ, Grad Sch Engn, Dept Micro Engn, Sakyo Ku, Kyoto 6068317, Japan
关键词
High Precision Machining; Cutting Force; Displacement Sensor; Spindle Error Motion;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper deals with cutting force monitoring for high precision machining. The authors have employed displacement sensors to monitor the cutting forces, as they are cheap and small enough to be built in the spindle structure. A monitoring method, which utilizes sensitive displacement sensors, is discussed. The sensors are installed in X Y directions near the front bearings of the spindle, to detect the small displacements of a spindle caused by cutting forces. Monitoring tests are carried out under end milling operations and the cutting forces are estimated from the displacement signals by the simple signal processing technique. However, as the displacement sensor measures the variation of the gap size between the sensor head and the target surface, it also records displacements due to error motion of a spindle's axis of rotation in radial direction and roundness errors of the target surface. By comparing the cutting force estimated from displacement sensors with the cutting force measured by using a dynamometer, the machine tool spindle error motions is investigated, and its compensation scheme is proposed. The test results show that the monitoring system is reliable for the adaptive control of machining accuracy for end milling process.
引用
收藏
页码:310 / 315
页数:6
相关论文
共 50 条
  • [1] High-precision machining by measurement and compensation of motion error
    Kono, Daisuke
    Matsubara, Atsushi
    Yamaji, Iwao
    Fujita, Tomoya
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (10): : 1103 - 1110
  • [2] Measurement of Radial and Axial Error Motion in a High Precision Spindle
    Zhang, Xi
    Bao, Sheng
    Cheng, Fang
    [J]. ADVANCED MANUFACTURING TECHNOLOGY AND CUTTING TOOLS, 2012, 381 : 34 - 37
  • [3] DETERMINATION OF SPATIAL DISPLACEMENT OF THE SPINDLE ROTATION AXIS ON HIGH-PRECISION MACHINES
    REYDMAN, LG
    [J]. SOVIET ENGINEERING RESEARCH, 1987, 7 (11): : 62 - 63
  • [4] High-precision magnetorheological finishing based on robot by measuring and compensating trajectory error
    Cheng, Runmu
    Li, Longxiang
    Li, Xingchang
    Yang, Bai
    Luo, Xiao
    Xue, Donglin
    Zhang, Xuejun
    [J]. OPTICS EXPRESS, 2022, 30 (25): : 44741 - 44768
  • [5] Rotation error measurement technology and experimentation research of high-precision hydrostatic spindle
    Ping Ma
    Chunming Zhao
    Xinhui Lu
    Chenglong Gong
    Xing Niu
    [J]. The International Journal of Advanced Manufacturing Technology, 2014, 73 : 1313 - 1320
  • [6] Rotation error measurement technology and experimentation research of high-precision hydrostatic spindle
    Ma, Ping
    Zhao, Chunming
    Lu, Xinhui
    Gong, Chenglong
    Niu, Xing
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 73 (9-12): : 1313 - 1320
  • [7] An adaptive digital filter method for measuring the radial error motion of ultra-precision spindle
    Gao, Minge
    Wang, Ping
    Cui, Hailong
    Wang, Junhua
    Wang, Shixiang
    Li, Yidan
    Kong, Lingbao
    Xu, Min
    [J]. MEASUREMENT SCIENCE AND TECHNOLOGY, 2023, 34 (10)
  • [8] Theoretical study on the radial error motion of high-precision aerostatic rotary tables
    KU Leuven, Department of Mechanical Engineering, Belgium
    [J]. Proc. Int. Conf. Eur. Soc. Precis. Eng. Nanotechnology, EUSPEN, (307-310):
  • [9] The Analysis of Radial/Axial Error Motion on a Precision Rotation Stage
    Kim, Jinho
    Shin, Dongik
    Yun, Deokwon
    Han, Changsoo
    [J]. PROCEEDINGS OF WORLD ACADEMY OF SCIENCE, ENGINEERING AND TECHNOLOGY, VOL 23, 2007, 23 : 173 - 177
  • [10] Measuring the angles and pyramidal error of high-precision prisms
    JaramilloNunez, A
    RobledoSanchez, C
    [J]. OPTICAL ENGINEERING, 1997, 36 (10) : 2868 - 2871