Batch Intensive Quenching Processes for Minimizing Steel Part Distortion and Improving Part Performance Characteristics

被引：1
|
作者：
Kobasko, N. I. [1 ,2 ]
Aronov, M. A. [1 ]
Guseynov, Sh. E. [3 ]
Rimshans, J. S. [3 ]
机构：
[1] IQ Technol Inc, POB 1787, Akron, OH 44309 USA
[2] Intens Technol Ltd, UA-03113 Kiev, Ukraine
[3] Univ Liepaja, Inst Math Sci & Informat Technol, LV-3401 Liepaja, Latvia
来源：
MATERIALS PERFORMANCE AND CHARACTERIZATION | 2014年 / 3卷 / 04期
关键词：
IQ-2; technology; self-regulated thermal process; high quality of steel parts; equipment; software; monitoring;
D O I：
10.1520/MPC20130096
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper discusses an intensive quenching method known as the IQ-2 process. The IQ-2 method is a two-or three-step quenching process for steel parts conducted in highly agitated water. The method is based on the use of a self-regulated thermal process that takes place during the quenching of steel parts in cold liquids such as water or water-salt solution. This quenching method eliminates the film boiling process and provides better control of the martensitic transformation during quenching, resulting in a significant reduction of part distortion after quenching. It also improves material mechanical properties and the performance characteristics of steel parts. It is underlined that proper software and equipment should be used when applying the IQ-2 quenching method for steel parts. Several practical examples of the application of the IQ-2 process are provided.
引用
收藏
页码：137 / 159
页数：23
相关论文
共 50 条
  • [1] MINIMIZING DISTORTION DURING HIGH-PRESSURE GAS QUENCHING, PART I
    Sims, Justin
    Li, Zhichao
    Ferguson, B. Lynn
    ADVANCED MATERIALS & PROCESSES, 2021, 179 (08): : 40 - 45
  • [2] MINIMIZING DISTORTION DURING HIGH-PRESSURE GAS QUENCHING, PART II
    Sims, Justin
    Li, Zhichao
    Lynn Ferguson, B.
    Advanced Materials and Processes, 2022, 180 (02): : 36 - 39
  • [3] MINIMIZING DISTORTION DURING HIGH-PRESSURE GAS QUENCHING, PART II
    Sims, Justin
    Li, Zhichao
    Ferguson, B. Lynn
    ADVANCED MATERIALS & PROCESSES, 2022, 180 (02): : 36 - 39
  • [4] Part II: basics of intensive quenching
    Kobasko, Nikolai I.
    Advanced Materials and Processes, 1996, 150 (02):
  • [5] Minimizing distortion during high-pressure gas quenching, part I: A new method to control distortion in difficult-to-quench geometries addresses the nonuniform cooling inherent in most gas quenching processes
    Sims, Justin
    Li, Zhichao
    Ferguson, B. Lynn
    Sims, Justin (justin.sims@dante-solu-tions.com), 1600, ASM International (179): : 40 - 45
  • [6] Nonlinear distortions and multisine signals - Part II: Minimizing the distortion
    Evans, C
    Rees, D
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2000, 49 (03) : 610 - 616
  • [7] Parametric evaluation of part distortion in additive manufacturing processes
    Quaranta, Giacomo
    Haug, Eberhard
    Duval, Jean Louis
    Chinesta, Francisco
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2020, 13 (01) : 29 - 41
  • [8] Parametric evaluation of part distortion in additive manufacturing processes
    Giacomo Quaranta
    Eberhard Haug
    Jean Louis Duval
    Francisco Chinesta
    International Journal of Material Forming, 2020, 13 : 29 - 41
  • [9] Prediction of part distortion in re-contouring processes
    Boess, V
    Rust, F.
    Denkena, B.
    Dittrich, M-A
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2020, 29 : 25 - 35
  • [10] Spray formed bearing steel insensitive to distortion - Part II - Distortion behavior
    Cui, C
    Schulz, A
    Fritsching, U
    Bauckhage, K
    Mayr, P
    JOURNAL OF MATERIALS SCIENCE, 2005, 40 (07) : 1673 - 1680
12345