Mechanical Properties of Corn Husk Flour/PP Bio-composites

被引：9
|
作者：
Jagadeesh, Dani. [1 ]
Sudhakara, P. [1 ]
Lee, D. W. [1 ]
Kim, H. S. [1 ]
Kim, B. S. [2 ]
Song, J. I. [1 ]
机构：
[1] Changwon Natl Univ, Dept Mech Engn, Chang Won, South Korea
[2] Korea Inst Mat Sci, Composites Mat Grp, Chang Won, South Korea
来源：
COMPOSITES RESEARCH | 2013年 / 26卷 / 04期
基金：
新加坡国家研究基金会;
关键词：
agro-waste fillers; mechanical properties; particle size; bio composites; biodegradable polymer;
D O I：
10.7234/composres.2013.26.4.213
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
The focus in the present work is to study the agro-waste corn husk bio-filler as reinforcement for polypropylene. These materials have been created by extrusion and injection molding. The effect of filler content by 10, 20, 30 and 40 wt. % and mesh sizes of 50 similar to 100, 100 and 300 on the mechanical properties was studied. For the un-notched specimens, the results of flexural strength showed a declining trend with increase the filler loading and the results of impact strength showed an increasing trend with increase the mesh size. In contrast, enhanced flexural modulus was observed with increasing filler loading and size.
引用
收藏
页码：213 / 217
页数：5
相关论文
共 50 条
  • [1] Effect of maleic anhydride content on physico-mechanical properties of γ-irradiated waste polypropylene/corn husk fibers bio-composites
    EL-Zayat, Mai M.
    Mohamed, Maysa A.
    Shaltout, Nadeen A.
    [J]. RADIOCHIMICA ACTA, 2020, 108 (02) : 151 - 157
  • [2] INFLUENCE OF HOT PRESSING PARAMETERS ON MECHANICAL PROPERTIES OF PP-HA BIO-COMPOSITES
    Younesi, Mousa
    Bahrololoom, Mohammad Ebrahim
    Fooladfar, Hamidreza
    [J]. IMECE2009: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 14, 2010, : 93 - 100
  • [3] Tensile properties of kenaf fiber and corn husk flour reinforced poly(lactic acid) hybrid bio-composites: Role of aspect ratio of natural fibers
    Kwon, Hyeok-Jin
    Sunthornvarabhas, Jackapon
    Park, Ji-Won
    Lee, Jung-Hun
    Kim, Hyun-Joong
    Piyachomkwan, Kuakoon
    Sriroth, Klanarong
    Cho, Donghwan
    [J]. COMPOSITES PART B-ENGINEERING, 2014, 56 : 232 - 237
  • [4] Miscibility and performance evaluation of natural-flour-filled PP/PBS and PP/PLA bio-composites
    Hee-Soo Kim
    Hyun-Joong Kim
    [J]. Fibers and Polymers, 2013, 14 : 793 - 803
  • [5] Miscibility and performance evaluation of natural-flour-filled PP/PBS and PP/PLA bio-composites
    Kim, Hee-Soo
    Kim, Hyun-Joong
    [J]. FIBERS AND POLYMERS, 2013, 14 (05) : 793 - 803
  • [6] Effect of temperature and pressure of hot pressing on the mechanical properties of PP-HA bio-composites
    Younesi, M.
    Bahrololoom, M. E.
    [J]. MATERIALS & DESIGN, 2009, 30 (09): : 3482 - 3488
  • [7] Experimental analysis of the mechanical properties of hybrid bio-composites
    Benzidane, M. A.
    Benzidane, R.
    Bouhamida, B.
    Errouane, L.
    Sereir, Z.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 53 : 253 - 259
  • [8] Development of Rice Husk and Sawdust Mycelium-Based Bio-composites: Optimization of Mechanical, Physical and Thermal Properties
    Mbabali H.
    Lubwama M.
    Yiga V.A.
    Were E.
    Kasedde H.
    [J]. Journal of The Institution of Engineers (India): Series D, 2024, 105 (1) : 97 - 117
  • [9] Thermal properties of agro-flour-filled biodegradable polymer bio-composites
    H.-S. Kim
    H.-S. Yang
    H.-J. Kim
    B.-J. Lee
    T.-S. Hwang
    [J]. Journal of Thermal Analysis and Calorimetry, 2005, 81 : 299 - 306
  • [10] Thermal properties of bio flour-filled polypropylene bio-composites with different pozzolan contents
    H. -S. Kim
    S. -W. Choi
    B. -H. Lee
    S. Kim
    H. -J. Kim
    C. W. Cho
    D. Cho
    [J]. Journal of Thermal Analysis and Calorimetry, 2007, 89 : 821 - 827
12345