EXPERIMENTAL INVESTIGATION OF A SQUARE-CUP DEEP-DRAWING PROCESS

被引：25
|
作者：
DANCKERT, J
机构：
[1] Department of Production, Aalborg University
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 1995年 / 50卷 / 1-4期
关键词：
D O I：
10.1016/0924-0136(94)01399-L
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The analysis of the deep-drawing of a square cup has been carried out as part of an international bench-mark research program organised by the NUMISHEET organising committee. Aluminum and mild steel have been employed in the experiments. The draw-in of the flange has been determined for a punch travel equal to 15 and 40 mm. A grid consisting of squares was electrochemically etched on the surface of the blanks, and the principal strains were determined in three directions from grid measurements for the above-mentioned punch travels. The thickness strains were determined also from direct measurements of the thickness, the thickness strains so determined comparing favourably with the thickness strains determined from the grid measurements.
引用
收藏
页码：375 / 384
页数：10
相关论文
共 50 条
  • [1] Experimental investigation of a square-cup deep-drawing process
    Aalborg Univ, Aalborg, Denmark
    [J]. J Mater Process Technol, 1-4 (375-384):
  • [2] Intelligent control scheme of divided blank holder for square-cup deep-drawing process
    Manabe, Ken-ichi
    Koyama, Hiroshi
    [J]. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2008, 32 (04): : 476 - 490
  • [3] SIMULATION OF SQUARE-CUP DEEP-DRAWING WITH DIFFERENT FINITE-ELEMENTS
    LI, KP
    HABRAKEN, AM
    BRUNEEL, H
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 50 (1-4) : 81 - 91
  • [4] SIMULATION OF SQUARE-CUP DEEP-DRAWING WITH VARIOUS FRICTION AND MATERIAL MODELS
    RONDA, J
    MERCER, CD
    BOTHMA, AS
    OLIVER, GJ
    COLVILLE, KW
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 50 (1-4) : 92 - 104
  • [5] Analysis of Square Cup Deep-Drawing Test of Pure Titanium
    Ogawa, Takaki
    Ma, Ninshu
    Ueyama, Minoru
    Harada, Yasunori
    [J]. NUMISHEET 2016: 10TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, PTS A AND B, 2016, 734
  • [6] Analysis of wear in deep-drawing process of a cylindrical cup
    Shahani, A. R.
    Salehinia, I.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 200 (1-3) : 451 - 459
  • [7] Analysis of the square-cup stretching process
    [J]. Huang, You-Min, 1600, Elsevier Science B.V., Amsterdam (49): : 3 - 4
  • [8] AN ANALYSIS OF THE SQUARE-CUP STRETCHING PROCESS
    HUANG, YM
    LIU, CH
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 49 (3-4) : 229 - 246
  • [9] Numerical simulation of square cup deep-drawing process under the different constraint degrees condition
    Xiao, Xiaoting
    Huang, Licheng
    Liao, Yijuan
    [J]. ADVANCED MATERIALS, PTS 1-4, 2011, 239-242 : 2225 - 2228
  • [10] INVESTIGATION INTO DEEP DRAWING OF THE SQUARE CUP BY CLADDING
    HIRAIWA, M
    KONDO, K
    [J]. BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1985, 28 (237): : 550 - 555
12345