FEM-supported simulation of chip formation and flow in gear hobbing of spur and helical gears

被引：61
|
作者：
Bouzakis, K. -D. [1 ]
Friderikos, O. [1 ]
Tsiafis, I. [1 ]
机构：
[1] Aristotle Univ Thessaloniki, Thessaloniki, Greece
来源：
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY | 2008年 / 1卷 / 01期
关键词：
Gear hobbing; FEM simulation; Chip formation;
D O I：
10.1016/j.cirpj.2008.06.004
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An integrated procedure for simulating the complicated chip formation and flow in gear hobbing is presented. The mathematical description of this manufacturing method is based on the calculation of penetrations between cutting teeth and gear gap, a solidmodeling process and finally an implementation into a FEM code. Additionally, hobbing of spur gears and the four possible variations for manufacturing helical gears are investigated. A comparison of the calculated chips with the cut ones was conducted and revealed a sufficient similarity. Finally, visualization of phenomena such as of the chip collision with gear flanks during the chip flow in individual generating positions is provided. (C) 2008 CIRP.
引用
收藏
页码：18 / 26
页数：9
相关论文
共 50 条
  • [1] CAD-based simulation of the hobbing process for the manufacturing of spur and helical gears
    V. Dimitriou
    A. Antoniadis
    [J]. The International Journal of Advanced Manufacturing Technology, 2009, 41 : 347 - 357
  • [2] CAD-based simulation of the hobbing process for the manufacturing of spur and helical gears
    Dimitriou, V.
    Antoniadis, A.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 41 (3-4): : 347 - 357
  • [3] DYNAMIC TOOTH POWER OF HELICAL SPUR GEARS .1. LOAD DISTRIBUTION AND CONTRACTION IN GEAR TEETH OF HELICAL SPUR GEARS
    YAMASHIT.S
    [J]. SCIENCE REPORTS OF THE RESEARCH INSTITUTES TOHOKU UNIVERSITY SERIES A-PHYSICS CHEMISTRY AND METALLURGY, 1968, 19 (5-6): : 322 - &
  • [4] COMPUTER-AIDED CALCULATION OF THE CHIP SECTION IN SPUR-GEAR HOBBING
    BASHKIROV, VN
    SEROVA, AA
    [J]. SOVIET ENGINEERING RESEARCH, 1984, 4 (01): : 69 - 71
  • [5] FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears
    F. Planitzer
    T. Hatzenbichler
    B. Buchmayr
    [J]. International Journal of Material Forming, 2009, 2 : 93 - 96
  • [6] A comparison and experimental validation of gear contact models for spur and helical gears
    Toso, A.
    Palermo, A.
    de-Juan, A.
    Cerda, R.
    Agazzi, A.
    Mundo, D.
    Desmet, W.
    Heirman, G. H. K.
    [J]. INTERNATIONAL GEAR CONFERENCE 2014, 2014, : 351 - +
  • [7] FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears
    Planitzer, F.
    Hatzenbichler, T.
    Buchmayr, B.
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2009, 2 : 93 - 96
  • [8] Indenter surface area and hardness determination by means of a FEM-supported simulation of nanoindentation
    Bouzakis, KD
    Michailidis, N
    [J]. THIN SOLID FILMS, 2006, 494 (1-2) : 155 - 160
  • [9] Impact of High-Speed Image Recognition of Transition Phenomenon of Chip Formation and Chip Flow in Gear Hobbing Process
    Umezaki, Yoji
    Kurokawa, Syuhei
    Ariura, Yasutsune
    [J]. MEASUREMENT TECHNOLOGY AND INTELLIGENT INSTRUMENTS IX, 2010, 437 : 189 - 193
  • [10] Tooth root strength of spur and helical gears manufactured with gear-shaper cutters
    Kawalec, Andrzej
    Wiktor, Jerzy
    [J]. JOURNAL OF MECHANICAL DESIGN, 2008, 130 (03)
12345