On the Intelligent Optimization of the Crevice Structure in a Rapid Compression Machine

被引:0
|
作者
GUO Qiang [1 ,2 ,3 ]
LIU Jie [1 ,2 ,3 ]
WU Yingtao [4 ]
WANG Hewu [5 ]
TANG Chenglong [4 ]
YU Ruiguang [1 ,2 ,3 ]
机构
[1] Department of Power Mechanical Engineering,Beijing Jiaotong University
[2] Beijing Key Laboratory of New Energy Vehicle Powertrain Technology
[3] National International Science and Technology Cooperation Base,Beijing Jiaotong University
[4] State Key Laboratory of Multiphase Flow in Power Engineering,Xi'an Jiaotong University
[5] State Key Laboratory of Automotive Safety and Energy,Tsinghua University
基金
中国国家自然科学基金; 中央高校基本科研业务费专项资金资助;
关键词
D O I
暂无
中图分类号
TH45 [压缩机、压气机];
学科分类号
080704 ;
摘要
In this study,the multi-objective intelligent optimization of the crevice structure in a rapid compression machine(RCM) is carried out based on the RCM simulation model modified with the KIVA-3V program.A multi-objective optimization simulation model of the crevice structure based on the large eddy simulation model coupled with the genetic algorithm NSGA-Ⅲ is established.Six optimization parameters and seven optimization objectives are selected in the optimization process.The results show that the genetic algorithm can quickly find the values of the optimized parameters.The crevice volume ratio shows a trade-off relationship with the dimensionless temperature ratio Tmax/Taverand the tumble ratio.A larger crevice volume can reduce the flow of boundary layer cryogenic gas into the combustion chamber,thus improving the temperature uniformity.In addition,the crevice entrance width and the connecting channel length should be smaller,while the volume of the crevice main chamber should be larger,so as to sufficiently introduce the low-temperature gas of the boundary layer into the crevice and reduce their influence on the temperature field of the combustion chamber.When the crevice volume accounts for10% of the total volume,the temperature uniformity of the combustor is significantly enhanced,and when the crevice volume accounts for 30.4%,there is almost no low-temperature vortex in the combustion chamber.
引用
收藏
页码:1200 / 1215
页数:16
相关论文
共 50 条
  • [1] On the Intelligent Optimization of the Crevice Structure in a Rapid Compression Machine
    Qiang Guo
    Jie Liu
    Yingtao Wu
    Hewu Wang
    Chenglong Tang
    Ruiguang Yu
    [J]. Journal of Thermal Science, 2024, 33 : 1200 - 1215
  • [2] On the Intelligent Optimization of the Crevice Structure in a Rapid Compression Machine
    Guo, Qiang
    Liu, Jie
    Wu, Yingtao
    Wang, Hewu
    Tang, Chenglong
    Yu, Ruiguang
    [J]. JOURNAL OF THERMAL SCIENCE, 2024, 33 (03) : 1200 - 1215
  • [3] A rapid compression machine with crevice containment
    Mittal, Gaurav
    Bhari, Anil
    [J]. COMBUSTION AND FLAME, 2013, 160 (12) : 2975 - 2981
  • [4] Effect of crevice mass transfer in a rapid compression machine
    Mittal, Gaurav
    Chomier, Mickael
    [J]. COMBUSTION AND FLAME, 2014, 161 (02) : 398 - 404
  • [5] Optimal piston crevice study in a rapid compression machine
    Nyong, Oku
    Woolley, Robert
    Blakey, Simon
    Alborzi, Ehsan
    [J]. 2ND INTERNATIONAL CONFERENCE ON COMPUTATIONAL FLUID DYNAMICS IN RESEARCH AND INDUSTRY (CFDRI 2017), 2017, 243
  • [6] A numerical assessment of the novel concept of crevice containment in a rapid compression machine
    Mittal, Gaurav
    Raju, Mandhapati P.
    Bhari, Anil
    [J]. COMBUSTION AND FLAME, 2011, 158 (12) : 2420 - 2427
  • [7] CFD study of the Effect of Piston Crevice Volume on the Temperature Distribution in a Rapid Compression Machine
    Nyong, Oku E.
    Ebieto, Celestine
    Bassey, Ene Ekpo
    Ikem, Ikem Azorshubel
    [J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2019, 13 (01) : 46 - 51
  • [8] Computational assessment of an approach for implementing crevice containment in rapid compression machines
    Mittal, Gaurav
    Gupta, Sreenath
    [J]. FUEL, 2012, 102 : 536 - 544
  • [9] Bowl piston geometry as an alternative to enlarged crevice pistons for rapid compression machines
    Dasrath, Dereck K.
    Biwalkar, Rohan
    Singh, Satbir
    Northrop, William F.
    [J]. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2021, 38 (04) : 5723 - 5731
  • [10] Autoignition of ethanol in a rapid compression machine
    Mittal, Gaurav
    Burke, Sinead M.
    Davies, Varun A.
    Parajuli, Bikash
    Metcalfe, Wayne K.
    Curran, Henry J.
    [J]. COMBUSTION AND FLAME, 2014, 161 (05) : 1164 - 1171