Characterization of friction stir welded joint of low nickel austenitic stainless steel and modified ferritic stainless steel

被引：0
|
作者：
Mounarik Mondal
Hrishikesh Das
Eun Yeong Ahn
Sung Tae Hong
Moon-Jo Kim
Heung Nam Han
Tapan Kumar Pal
机构：
[1] University of Ulsan,School of Mechanical Engineering
[2] Korea Institute of Industrial Technology,Liquid Processing & Casting R&D Group
[3] Seoul National University,Department of Materials Science and Engineering
[4] Jadavpur University,Metallurgical and Material Engineering Department
来源：
Metals and Materials International | 2017年 / 23卷
关键词：
dissimilar stainless steels; friction stir welding; microstructure; texture; electron back scattered diffraction;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Friction stir welding (FSW) of dissimilar stainless steels, low nickel austenitic stainless steel and 409M ferritic stainless steel, is experimentally investigated. Process responses during FSW and the microstructures of the resultant dissimilar joints are evaluated. Material flow in the stir zone is investigated in detail by elemental mapping. Elemental mapping of the dissimilar joints clearly indicates that the material flow pattern during FSW depends on the process parameter combination. Dynamic recrystallization and recovery are also observed in the dissimilar joints. Among the two different stainless steels selected in the present study, the ferritic stainless steels shows more severe dynamic recrystallization, resulting in a very fine microstructure, probably due to the higher stacking fault energy.
引用
收藏
页码：948 / 957
页数：9
相关论文
共 50 条
  • [1] Characterization of friction stir welded joint of low nickel austenitic stainless steel and modified ferritic stainless steel
    Mondal, Mounarik
    Das, Hrishikesh
    Ahn, Eun Yeong
    Hong, Sung Tae
    Kim, Moon-Jo
    Han, Heung Nam
    Pal, Tapan Kumar
    [J]. METALS AND MATERIALS INTERNATIONAL, 2017, 23 (05) : 948 - 957
  • [2] Microstructural analysis of friction stir welded ferritic stainless steel
    Cho, Hoon-Hwe
    Han, Heung Nam
    Hong, Sung-Tae
    Park, Jong-Hwan
    Kwon, Yong-Jai
    Kim, Seok-Hyun
    Steel, Russell J.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (06): : 2889 - 2894
  • [3] Microstructures in Friction Stir Welded 304 Austenitic Stainless Steel
    H. Kokawa
    S. H. C. Park
    Y. S. Sato
    K. Okamoto
    S. Hirano
    M. Inagaki
    [J]. Welding in the World, 2005, 49 (3-4) : 34 - 40
  • [4] Corrosion Properties in Friction Stir Welded 304 Austenitic Stainless Steel
    S. H. C. Park
    Y. S. Sato
    H. Kokawa
    K. Okamoto
    S. Hirano
    M. Inagaki
    [J]. Welding in the World, 2005, 49 (3-4) : 63 - 68
  • [5] Characterization and Strain-Hardening Behavior of Friction Stir-Welded Ferritic Stainless Steel
    Sharma, Gaurav
    Dwivedi, Dheerendra Kumar
    Jain, Pramod Kumar
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (12) : 5997 - 6005
  • [6] Characterization and Strain-Hardening Behavior of Friction Stir-Welded Ferritic Stainless Steel
    Gaurav Sharma
    Dheerendra Kumar Dwivedi
    Pramod Kumar Jain
    [J]. Journal of Materials Engineering and Performance, 2017, 26 : 5997 - 6005
  • [7] Mechanical Properties and Microstructural Characterization of Friction Stir Welded AISI 316 Austenitic Stainless Steel
    Meshram, Manish P.
    Kodli, Basanth Kumar
    Dey, Suhash R.
    [J]. INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 2376 - 2381
  • [8] Joining of austenitic stainless steel and ferritic stainless steel to sialon
    Hussain, P
    Isnin, A
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 113 (1-3) : 222 - 227
  • [9] AUSTENITIC STAINLESS-STEEL FERRITIC STEEL WELD JOINT FAILURES
    KLUEH, RL
    KING, JF
    [J]. WELDING JOURNAL, 1982, 61 (09) : S302 - S311
  • [10] Mechanical properties of friction stir welded high nitrogen containing austenitic stainless steel
    Miyano, Y.
    Fujii, H.
    Sun, Y. F.
    Katada, Y.
    Kuroda, S.
    Kudo, G.
    Kamiya, O.
    [J]. PROCEEDINGS OF THE 1ST INTERNATIONAL JOINT SYMPOSIUM ON JOINING AND WELDING, 2013, : 95 - 100
12345