Gold-functionalized graphene as conductive filler in UV-curable epoxy resin

被引:0
|
作者
M. Martin-Gallego
M. A. Lopez-Manchado
P. Calza
I. Roppolo
M. Sangermano
机构
[1] Instituto de Ciencia y Tecnologia de Polimeros,Dipartimento di Chimica
[2] ICTP-CSIC,Center for Space Human Robotics
[3] Università di Torino,Dipartimento di Scienza Applicata e Tecnlogia
[4] Istituto Italiano di Tecnologia,undefined
[5] Politecnico di Torino,undefined
来源
关键词
Gold Nanoparticles; Graphene Sheet; Conductive Filler; Charge Transfer Mechanism; Epoxy Nanocomposite;
D O I
暂无
中图分类号
学科分类号
摘要
Graphene sheets (GNPs) were functionalized with gold nanoparticles via a spontaneous deposition of gold particles on its surface occurred by chemical reduction of (Au3+). Even after only 1 min of reaction, the reduction of Au3+ into metallic Au0, takes place in evidencing the rapid and spontaneous character of the reduction. The particles, after only 3 min of deposition, have very small diameters, with average centred at 17 nm. The Au–GNP nanofillers were dispersed into UV-curable epoxy resin. Conductivity of the epoxy crosslinked samples containing Au–GNP nanofiller were compared to the values obtained for epoxy nanocomposite containing the same amount of bare graphene; the electrical conductivity was significantly increased by the addition of Au–GNP nanofiller, of about four orders of magnitude. This could be attributed to a charge transfer mechanism, which is strongly enhanced by the presence of gold NPs.
引用
收藏
页码:605 / 610
页数:5
相关论文
共 50 条
  • [1] Gold-functionalized graphene as conductive filler in UV-curable epoxy resin
    Martin-Gallego, M.
    Lopez-Manchado, M. A.
    Calza, P.
    Roppolo, I.
    Sangermano, M.
    JOURNAL OF MATERIALS SCIENCE, 2015, 50 (02) : 605 - 610
  • [2] Synthesis and Characterization of UV-Curable Epoxy Cinnamic Resin
    Li J.
    Zhang J.
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2019, 35 (06): : 23 - 28and34
  • [3] Synthesis and application on UV-curable epoxy/dendritic maleate resin
    Zhang, Linya
    Jiao, Qingze
    Zhao, Yun
    Zhou, Mingji
    Feng, Wei
    Ge, Yanrui
    POLYMER BULLETIN, 2011, 67 (08) : 1583 - 1594
  • [4] Preparation and properties of UV-curable epoxy-polysiloxane resin
    紫外光固化环氧聚硅氧烷树脂的制备与性能
    Lin, Shudong (linsd@gic.ac.cn); Hu, Jiwen (hujiwen@gic.ac.cn), 1600, Fine Chemicals (37): : 1379 - 1385
  • [5] Synthesis and application on UV-curable epoxy/dendritic maleate resin
    Linya Zhang
    Qingze Jiao
    Yun Zhao
    Mingji Zhou
    Wei Feng
    Yanrui Ge
    Polymer Bulletin, 2011, 67
  • [6] Research on the Conductivity of UV-Curable Conductive Ink
    Gu Linya
    Wang Guoyu
    Wang Dandan
    RESEARCH ON FOOD PACKAGING TECHNOLOGY, 2014, 469 : 51 - 54
  • [7] Graphene reinforced UV-curable epoxy resins: Design, manufacture and material performance
    Barletta, Massimiliano
    Vesco, Silvia
    Puopolo, Michela
    Tagliaferri, Vincenzo
    PROGRESS IN ORGANIC COATINGS, 2016, 90 : 414 - 424
  • [8] Programmable UV-Curable Resin by Dielectric Force
    Lin, Yi-Wei
    Chen, Chang-Yi
    Chang, Ying-Fang
    Chang, Yii-Nuoh
    Yao, Da-Jeng
    MICROMACHINES, 2023, 14 (02)
  • [9] Synthesis of UV-curable disulfide functionalized polysiloxane for stretchable gold electrodes with microcrack
    Zhang, Wei
    Bai, Yongping
    Yang, Zhen
    Wang, Ruolin
    Meng, Linghui
    Wang, Yu
    EUROPEAN POLYMER JOURNAL, 2023, 198
  • [10] Design of UV-curable Alicyclic Epoxy Resin System and Optimization of Its Response Surface
    Xu Z.
    Ji J.
    Liu Y.
    Qiang J.
    Cailiao Daobao/Materials Reports, 2021, 35 (14): : 14190 - 14197