A new inorganic-organic hybrid material as consolidation material for Jinsha archaeological site of Chengdu

被引:0
|
作者
Tao Wan
Jin-hui Lin
机构
[1] State Key Laboratory of Geohazard Prevention and Geoenvironment Protection (Chengdu University of Technology),
[2] Mineral Resources Chemistry Key Laboratory of Sichuan Higher Education Institutions (Chengdu University of Technology),undefined
来源
关键词
hybrid; materials; earthen; archaeological; site; sol-gel; consolidation;
D O I
暂无
中图分类号
学科分类号
摘要
An organic-inorganic epoxy-silica-acrylate (ESA) hybrid material was used for the consolidation of Jinsha archaeological site of Chengdu in China. The hybrid materials have multiple functional groups, such as anhydride, epoxy, hydroxyl and carboxyl, which can form networks at room temperature and result in an enhanced chemical and water resistance of the consolidated soil. With increasing of TEOS content, the hybrid materials keep colorless with only some reduction of transparency, while the hybrid materials obviously turn from moderate yellowish to brown yellow with the increase of the epoxy resin (EOR) content after 120 min UV irradiation. SEM observation indicates that the hybrid soil consolidation materials can effectively penetrate into the soil substrate, fill up most of the pores, decrease the area porosity and consolidate the Jinsha archaeological soil. The consolidation performances are in the sequence: ESA > K2SiO4 (PS) > tetraethyl orthosilicate (TEOS).
引用
收藏
页码:487 / 492
页数:5
相关论文
共 50 条
  • [1] A new inorganic-organic hybrid material as consolidation material for Jinsha archaeological site of Chengdu
    Wan Tao
    Lin Jin-hui
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2014, 21 (02) : 487 - 492
  • [2] A new inorganic-organic hybrid material as consolidation material for Jinsha archaeological site of Chengdu
    万涛
    林金辉
    JournalofCentralSouthUniversity, 2014, 21 (02) : 487 - 492
  • [3] Inorganic-organic hybrid material for lithography
    Pang, L
    Yan, YB
    Jin, GF
    Wu, MX
    1ST INTERNATIONAL SYMPOSIUM ON LASER PRECISION MICROFABRICATION, 2000, 4088 : 171 - 174
  • [4] New lamellar Si-Al inorganic-organic hybrid material
    M. Jaber
    J. Miehe-Brendle
    R. Le Dred
    Journal of Materials Science, 2004, 39 : 1489 - 1490
  • [5] New lamellar Si-Al inorganic-organic hybrid material
    Jaber, M
    Miehe-Brendle, J
    Le Dred, R
    JOURNAL OF MATERIALS SCIENCE, 2004, 39 (04) : 1489 - 1490
  • [6] Porous inorganic-organic hybrid material by oxygen plasma treatment
    Aura, Susanna
    Jokinen, Ville
    Laitinen, Mikko
    Sajavaara, Timo
    Franssila, Sami
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2011, 21 (12)
  • [7] The inorganic-organic hybrid material triethylenetetrammonium hexachloridorhodate(III) chloride
    Hahn, Thomas
    Frank, Walter
    ACTA CRYSTALLOGRAPHICA SECTION E-STRUCTURE REPORTS ONLINE, 2008, 64 : M257 - U2407
  • [8] Improvements of Inorganic-Organic Hybrid Polymers as Dielectric and Passivation Material
    Domann, Gerhard
    Houbertz, Ruth
    Bahr, Joachim
    Spitzlei, Christine
    PROCEEDINGS OF THE 2012 IEEE 14TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE, 2012, : 72 - 76
  • [9] Preparation and performance study of the reinforcement material for Jinsha archaeological site
    Li, Xiao-Jie
    Wan, Tao
    Lin, Jin-Hui
    Xiao, Wei-Bing
    Cailiao Kexue yu Gongyi/Material Science and Technology, 2009, 17 (02): : 215 - 220
  • [10] Azamacrocycle-containing gallium phosphates: A new class of inorganic-organic hybrid material
    Wragg, DS
    Hix, GB
    Morris, RE
    JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 1998, 120 (27) : 6822 - 6823