Centrifuge modelling of rainfall-induced slope failure in variably saturated soil

This paper presents the results of centrifuge tests on rainfall-induced instabilities in variably saturated slopes. The roles of rainfall intensity and initial conditions, such as slope angle, porosity and degree of saturation of the soil, in the failure initiation and postfailure kinematics are considered. The failure patterns, infiltration profile and deformation at prefailure and postfailure stages are characterized. The results indicate that rainfall-induced slope failures usually follow one of the following two failure modes, i.e. slide-to-flow and flowslide failure modes. The former pattern is characterized by soil mass flow after initial failure along a continuous shear surface, while the latter is more relevant to the rapid increase in the saturation at the slope surface, resulting in surface erosion channels followed by the acceleration of the soil mass. The flowslide failure pattern usually gives rise to several superficial shear surfaces and longer run-out distances. The rainfall intensity and profiles of the degree of saturation play the key roles in initiating the slope failure at the prefailure stage and subsequently in mobilizing the soil mass at the postfailure stage. Our test data, together with the data from the literature, are presented in two threshold curves to define the critical condition of slope failure under rainfall infiltration.