Enhancing the performance of dye-sensitized solar cells by ZnO nanorods/ZnO nanoparticles composite photoanode

In this paper, ZnO nanorods (NRs) were prepared by a two-step solution phase reaction. A composite photoanode architecture is fabricated by adding 0–0.20 at.% ZnO NRs into ZnO nanoparticles (NPs). The scanning electron microscopy image shows that the average diameter and length of the ZnO NRs are about 50 nm and 2–5 µm, respectively, and the ZnO NRs are uniformly embedded into the ZnO NPs photoanode. The UV–vis spectrum analysis reveals that the amount of dye adsorption of the composite photoanode decreases with increasing ZnO NRs content. Meanwhile, the influence of ZnO NRs contents on the dye-sensitized solar cells (DSSCs) performance is systematically investigated. The photocurrent density–voltage (J–V) characteristics reveal that the device performance of DSSCs can be significantly enhanced by the composite photoanode. Typically, the DSSC with 0.15 at.% ZnO NRs obtains the optimal energy conversion efficiency of 3.8%, which is 28.4% higher than that of the pristine ZnO DSSCs. The electrochemical impedance spectroscopy (EIS) analysis shows that ZnO NRs can provide a direct pathway for accelerating electron transport, extending the electron lifetime, suppressing electron recombination and improving electron collection efficiency. These results indicate that the incorporation of ZnO NRs in the photoanode is an effective way to improve the performance of DSSCs.