Surface segregation during injection molding of polycarbonate/poly(methyl methacrylate) blend

被引：0
|
作者：
Takumi Sako
Asae Ito
Masayuki Yamaguchi
机构：
[1] Japan Advanced Institute of Science and Technology,School of Materials Science
来源：
Journal of Polymer Research | 2017年 / 24卷
关键词：
Segregation; Polymer blend; Injection molding; Polycarbonate; Poly(methyl methacrylate);
D O I：
暂无
中图分类号：
学科分类号：
摘要：
We investigated the distribution of the constituent polymers of an injection-molded product comprising a miscible blend of polycarbonate (PC) and low-molecular-weight poly(methyl methacrylate) (PMMA). We found that PMMA became localized at the surface without affecting the transparency of the product. As a result, the surface hardness was effectively enhanced by a small amount of PMMA. This technique can be used to produce an ideal plastic glass that has high transparency, mechanical toughness, and high surface hardness.
引用
收藏
相关论文
共 50 条
  • [1] Surface segregation during injection molding of polycarbonate/poly(methyl methacrylate) blend
    Sako, Takumi
    Ito, Asae
    Yamaguchi, Masayuki
    JOURNAL OF POLYMER RESEARCH, 2017, 24 (06)
  • [2] Surface localization of poly(methyl methacrylate) in a miscible blend with polycarbonate
    Takumi Sako
    Shogo Nobukawa
    Masayuki Yamaguchi
    Polymer Journal, 2015, 47 : 576 - 579
  • [3] Surface localization of poly(methyl methacrylate) in a miscible blend with polycarbonate
    Sako, Takumi
    Nobukawa, Shogo
    Yamaguchi, Masayuki
    POLYMER JOURNAL, 2015, 47 (08) : 576 - 579
  • [4] Compatibility and viscosity of polycarbonate-poly(methyl methacrylate) blend
    Avdeev, NN
    Makarova, VV
    Kotomin, SV
    Kulichikhin, VG
    Kuleznev, VN
    POLYMER SCIENCE SERIES A, 2001, 43 (02) : 112 - 117
  • [5] Compatibilization efficiency of organoclay in an immiscible polycarbonate/poly(methyl methacrylate) blend
    Ray, SS
    Bousmina, M
    MACROMOLECULAR RAPID COMMUNICATIONS, 2005, 26 (06) : 450 - 455
  • [6] Morphology and properties of organoclay modified polycarbonate/poly(methyl methacrylate) blend
    Ray, S. Sinha
    Bousmina, M.
    Maazouz, A.
    POLYMER ENGINEERING AND SCIENCE, 2006, 46 (08): : 1121 - 1129
  • [7] Blend films of poly(methyl methacrylate) and poly(phenylenegermane): Topography and properties of surface
    Zakharova, OG
    Zaitsev, SD
    Gushchina, YY
    Semchikov, YD
    Gusev, SI
    POLYMER SCIENCE SERIES B, 2005, 47 (5-6) : 146 - 150
  • [8] Compatibilizing effect of poly(methyl methacrylate) in polycarbonate/poly(acrylonitrile-co-butadiene-co-styrene) blend
    Choi, KJ
    Lee, GH
    Ahn, SJ
    Shon, KH
    Kim, I
    Jeong, HM
    JOURNAL OF APPLIED POLYMER SCIENCE, 1996, 59 (03) : 557 - 560
  • [9] Compatibilizing effect of poly(methyl methacrylate) in polycarbonate/ poly(acrylonitrile-co-butadiene-co-styrene) blend
    Passenger Car Trim Engineering Dept., Hyundai Motor Company, Hwaseong 445-850, Korea, Republic of
    不详
    不详
    不详
    J. Appl. Polym. Sci., 3 (557-560):
  • [10] An effective etching technique for polycarbonate/core-shell poly(butyl acrylate) poly(methyl methacrylate) blend
    Lu, D
    Dong, LS
    Feng, ZL
    MACROMOLECULAR RAPID COMMUNICATIONS, 1997, 18 (05) : 411 - 415
12345