Production of high-manganese steel in arc furnaces. Part 2

被引：0
|
作者：
Vdovin K.N. [1 ]
Feoktistov N.A. [1 ]
Sinitskii E.V. [1 ]
Gorlenko D.A. [1 ]
Durov N.A. [2 ]
机构：
[1] Nosov Magnitogorsk State Technical University, Magnitogorsk
[2] Moscow Institute of Steel and Alloys, Moscow
来源：
Steel in Translation | 2016年 / 46卷 / 01期
关键词：
alloying with vanadium; argon injection; bulk content; calcium–strontium carbonate; impact strength; ladle treatment; nonmetallic inclusions;
D O I：
10.3103/S0967091216010150
中图分类号：
学科分类号：
摘要：
Metallographic data are presented for manganese steel before and after ladle treatment—specifically, treatment with calcium–strontium carbonate or argon injection in the ladle or both. Quantitative analysis of the nonmetallic inclusions is undertaken. The position of the inclusions relative to the grain boundaries is determined. Electron microscopy permits detailed study of the composition and form of the inclusions that appear during ladle treatment and without such treatment. The influence of various types of ladle treatment on the impact strength of manganese steel is discussed. Alloying of the manganese steel with vanadium is considered. Practical data regarding the influence of alloying with vanadium on the impact strength of the manganese steel are presented. © 2016, Allerton Press, Inc.
引用
下载
收藏
页码：16 / 20
页数：4
相关论文
共 50 条
  • [1] Production of high-manganese steel in arc furnaces. Part 1
    Vdovin K.N.
    Feoktistov N.A.
    Sinitskii E.V.
    Gorlenko D.A.
    Durov N.A.
    Steel in Translation, 2015, 45 (10) : 729 - 732
  • [2] Decarburization of a Chromium-containing Melt during the Production of Stainless Steel in Arc Furnaces.
    Povolotskii, D.Ya.
    Gudim, Yu.A.
    Shumakov, A.M.
    Katsman, Ts.L.
    Rudashevskii, L.Ya.
    1983,
  • [3] Load Impedances of High-Current Transformers Used with Steel Arc Furnaces.
    Dmochowski, Zbigniew
    Przeglad Elektrotechniczny, 1973, 49 (01): : 17 - 20
  • [4] POWER QUALITY MEASUREMENTS IN A STEEL INDUSTRY WITH ELECTRIC ARC FURNACES.
    Issouribehere, Pedro E.
    Barbero, Juan C.
    Issouribehere, Fernando
    Barbera, Gustavo A.
    2008 IEEE POWER & ENERGY SOCIETY GENERAL MEETING, VOLS 1-11, 2008, : 2521 - 2528
  • [5] HIGH CURRENT MULTIPLE ELECTRODES FOR USE IN ARC FURNACES.
    Harry, J.E.
    Knight, R.
    Steel Times, 1985, 213 (10): : 486 - 487
  • [6] ELECTRICAL CONDUCTIVITY OF THE ROOF OF ELECTRIC ARC STEEL MELTING FURNACES.
    Osipenko. V. D.
    Garbuz, S.S.
    Khromov, A.P.
    Refractories (English translation of Ogneupory), 1986, 27 (5-6): : 292 - 294
  • [7] REBUILDING ELECTRIC-ARC STEEL-MELTING FURNACES.
    Kulikov, A.F.
    Soviet Energy Technology (English translation of Energomashinostroenie), 1984, (08): : 76 - 77
  • [8] PRODUCTION OF STEEL FOR FLAT PRODUCTS IN LARGE ULTRA-HIGH-POWERED FURNACES.
    Strohmeier, B.
    Lodewijks, B.
    Journal of The South African Institute of Mining and Metallurgy, 1985, 85 (08): : 245 - 257
  • [9] Forging of High-Manganese Steel Crossing
    Wang, Yanhui
    Lv, Bo
    Zhang, Fucheng
    METALLURGIST, 2018, 62 (1-2) : 181 - 184
  • [10] High-manganese steel for ballistic requirements
    Nagel, Maximilian, 1600, Thyssenkrupp AG
12345