Formaldehyde emission from wood products: relationship between the values by the Chamber method and those by the Desiccator test

The formaldehyde off-gassing properties of various wood products were evaluated under environment conditions that simulate conditions of mobile home. The formaldehyde concentrations observed in the chamber were correlated to the 24-h desiccator formaldehyde potentials. It was found that 24-h desiccator values did correlate to formaldehyde levels in the chamber at a given temperature, relative humidity, air change rate, and sample loading. The 24-h desiccator method correlated to each other for a given wood product. Formaldehyde levels of wood products tested in combination reflected the levels of the highest single emitter. Formaldehyde concentrations from combinations of particleboards and plywood panels may be predicted from their single chamber K factor using the modified Hoetjer equation. Double loading of a single wood product did not double the chamber concentration at the low air change rate and sample loading. Finally, the formaldehyde concentrations observed in the chamber under conditions that simulated mobile loadings of wood product, air change rate, temperature, and humidity relate to real wood formaldehyde levels.