Study of TiB2 Coated Hard Alloy Tool Wear Resistance During Titanium Alloy Machining

被引：0
|
作者：
S. V. Сhertovskikh
L. Sh. Shuster
G. S. Fox-Rabinovich
机构：
[1] Ufa State Aviation Technical University,
[2] McMaster University,undefined
来源：
Chemical and Petroleum Engineering | 2021年 / 57卷
关键词：
cutting tool wear; TiB; coated tool; titanium alloy TiAl6V4; cutting regimes;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Results are presented for a study of the wear resistance and tribological properties (friction coefficient adhesive component, bond adhesive shear strength, wear resistance) of hard alloy with and without a TiB2 coating during machining titanium alloy TiAl6V4 that is difficult to machine depending on cutting regime. Use of a hard alloy cutting tool with a TiB2 coating is effective for alloy rough machining at slow cutting rates under conditions of intense build-up. During finishing operations at faster cutting rates, when crater wear on the front surface of the cutter predominates, wear resistance of coated and uncoated tools is almost the same.
引用
收藏
页码：690 / 695
页数：5
相关论文
共 50 条
  • [1] Study of TiB2 Coated Hard Alloy Tool Wear Resistance During Titanium Alloy Machining
    Chertovskikh, S., V
    Shuster, L. Sh
    Fox-Rabinovich, G. S.
    CHEMICAL AND PETROLEUM ENGINEERING, 2021, 57 (7-8) : 690 - 695
  • [2] Influence of Cutting Conditions on the Wear Resistance of Tools with a TiB2 Coating during Titanium Alloy Machining
    Shuster, L. Sh
    Fox-Rabinovich, G. S.
    Chertovskikh, S., V
    JOURNAL OF FRICTION AND WEAR, 2021, 42 (06) : 466 - 472
  • [3] Influence of Cutting Conditions on the Wear Resistance of Tools with a TiB2 Coating during Titanium Alloy Machining
    L. Sh. Shuster
    G. S. Fox-Rabinovich
    S. V. Chertovskikh
    Journal of Friction and Wear, 2021, 42 : 466 - 472
  • [4] Tool wear of coated tools when machining a titanium alloy
    Bilbatua, JP
    Llorente, JI
    de Lacalle, LNL
    Sanchez, JA
    COST 516 TRIBOLOGY SYMPOSIUM, 1998, 180 : 337 - 347
  • [5] On the mechanism of tool crater wear during titanium alloy machining
    Hatt, Oliver
    Crawforth, Pete
    Jackson, Martin
    WEAR, 2017, 374 : 15 - 20
  • [6] Wear resistance of a coated hard-alloy tool in the machining of high-temperature chromium alloys
    Adaskin A.M.
    Butrim V.N.
    Vereshchaka A.S.
    Russian Engineering Research, 2016, 36 (10) : 867 - 871
  • [7] Investigation of the Wear Performance of TiB2 Coated Cutting Tools during the Machining of Ti6Al4V Alloy
    Chowdhury, Mohammad Shariful Islam
    Bose, Bipasha
    Fox-Rabinovich, German
    Veldhuis, Stephen Clarence
    MATERIALS, 2021, 14 (11)
  • [8] A study of TiB2/TiB gradient coating by laser cladding on titanium alloy
    Lin, Yinghua
    Lei, Yongping
    Li, Xueigiao
    Zhi, Xiaohui
    Fu, Hanguang
    OPTICS AND LASERS IN ENGINEERING, 2016, 82 : 48 - 55
  • [9] ON THE INTERACTION OF TIB2 WITH TITANIUM CARBONITRIDE COATED HARD ALLOYS
    BLIZNAKOV, G
    ZAKHARIEV, Z
    PESHEV, P
    JOURNAL OF THE LESS-COMMON METALS, 1981, 82 (1-2): : 360 - 360
  • [10] Tool Wear Mechanisms during Machining of Alloy 625
    Fusova, Lenka
    Rokicki, Pawel
    Spotz, Zdenek
    Saksl, Karel
    Siemers, Carsten
    STRUCTURAL INTEGRITY AND FAILURE, 2011, 275 : 204 - +
12345