Effective influences of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide (EMIMTFSI) ionic liquid on the ion transport properties of micro-porous zinc-ion conducting poly (vinyl chloride) /poly (ethyl methacrylate) blend-based polymer electrolytes

A series of new gel polymer electrolytes (GPEs) based on different concentrations of a hydrophobic ionic liquid (IL) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide (EMIMTFSI) entrapped in an optimized typical composition of polymer blend-salt matrix [poly(vinyl chloride) (PVC) (30 wt%) / poly(ethyl methacrylate) (PEMA) (70 wt%) : 30 wt% zinc triflate Zn(CF3SO3)2] has been prepared using facile solution casting technique. The AC impedance analysis has revealed the occurrence of the maximum ionic conductivity of 1.10 × 10−4 Scm−1 at room temperature (301 K) exhibited by the PVC/PEMA- Zn(OTf)2 system containing 80 wt% ionic liquid. The addition of EMIMTFSI into the optimized PVC/PEMA- Zn(OTf)2 system in different weight percentages enhances the number of free zinc ions thereby leading to enrichment of ionic conductivity. The structural and complexation behaviour of the as prepared polymer gel electrolytes was substantiated by subjecting these electrolyte films to X-ray diffraction (XRD) and Attenuated total reflectance - Fourier transformed infrared (ATR-FTIR) investigations. The wider electrochemical stability window ~ 3.23 V and a reasonable cationic transference number (tZn2+) of 0.63 have been attained for the polymer gel electrolyte film containing higher loading of (80 wt%) ionic liquid. The development of the amorphous phase of these gel polymer electrolyte membranes with increasing ionic liquid content was observed from scanning electron microscopic (SEM) analysis. The results of the current work divulge the assurance of developing GPEs based on ionic liquids for prospective application in zinc battery systems.