Frictional properties of sediments entering the Costa Rica subduction zone offshore the Osa Peninsula: implications for fault slip in shallow subduction zones

We examined the frictional properties of sediments on the Cocos plate offshore the Osa Peninsula, Costa Rica, and explored variations in the intrinsic frictional properties of the sediment inputs to the Costa Rica subduction zone. Sediment samples were collected at Site U1381A during the Integrated Ocean Drilling Program Expedition 334, and include hemipelagic clay to silty clay material (Unit I) and pelagic silicic to calcareous ooze (Unit II). The frictional properties of the samples were tested at a normal stress of 5 MPa under water-saturated conditions and with slip velocities ranging from 0.0028 to 2.8 mm/s for up to 340 mm of displacement. The experimental results reveal that the steady-state friction coefficient values of clay to silty clay samples are as low as ~0.2, whereas those of silicic to calcareous ooze samples are as high as 0.6 to 0.8. The clay to silty clay samples show a positive dependence of friction on velocity for all tested slip velocities. In contrast, the silicic to calcareous ooze samples show a negative dependence of friction on velocity at velocities of 0.0028 to 0.28 mm/s and either neutral or positive dependence at velocities higher than 0.28 mm/s. Given the low frictional coefficient values observed for the clay to silty clay samples of Unit I, the décollement at the Costa Rica Seismogenesis Project transect offshore the Osa Peninsula likely initiates in Unit I and is initially very weak. In addition, the velocity-strengthening behavior of the clay to silty clay suggests that faults in the very shallow portion of the Costa Rica subduction zone are stable and thus behave as creeping segments. In contrast, the velocity-weakening behavior of the silicic to calcareous ooze favors unstable slip along faults. The shallow seismicity occurred at a depth as shallow as ~9 km along the Costa Rica margin offshore the Osa Peninsula (Mw 6.4, June 2002), indicating that materials characterized by velocity-weakening behavior constitute the fault zone at the depth of the seismicity. Fault slip nucleating along a fault in Unit II would be a likely candidate for the source of the shallow earthquake event.