Mechanical relaxations of a (Zr77.5Ti22.5)55(Ni48Cu52)21.25Be23.75 amorphous alloy studied using dynamic mechanical analysis

被引:0
|
作者
H. T. Jeong
E. Fleury
W. T. Kim
D. H. Kim
机构
[1] Yonsei University,BK21 Division of Humantronics Information Materials
[2] Korea Institute of Science and Technology,Advanced Metals Research Center
[3] Chungju University,Applied Science Division
[4] Yonsei University,Department of Metallurgical Engineering
来源
关键词
dynamic mechanical analysis; time-temperature superposition (TTS) principle; amorphous alloy; mechanical relaxation; fragility index;
D O I
暂无
中图分类号
学科分类号
摘要
The dynamic mechanical properties of a (Zr77.5Ti22.5)55(Ni48Cu52)21.25Be23.75 amorphous alloy were investigated by frequency-dependent elastic moduli and isothermal multi-frequency measurements. The frequency-dependent loss modulus showed a relaxation behavior resulting from a glass transition, and the variation of the peak frequency was related to the Arrhenius equation. Isothermal multi-frequency measurement data were used to construct the master curves of the elastic moduli and tan δ by applying the time-temperature superposition principle. The temperature dependence of the shift factor was found to follow the Arrhenius relationship, and the activation energies for the low temperature relaxation and glass transition were approximately 156.6kJ/mol and 554kJ/mol, respectively. The glass transition temperature (Tg) was manifested by the crossover region of the shift factor dependence, and from the relationship between the shift factors and the temperature aboveTg), the fragility index of this alloy was estimated.
引用
收藏
页码:447 / 453
页数:6
相关论文
共 8 条
  • [1] Mechanical relaxations of a (Zr77.5Ti22.5)55(Ni48Cu52)21.25Be23.75 amorphous alloy studied using dynamic mechanical analysis
    Jeong, H. T.
    Fleury, E.
    Kim, W. T.
    Kim, D. H.
    METALS AND MATERIALS INTERNATIONAL, 2007, 13 (06) : 447 - 453
  • [2] The mechanical relaxations of a Mm55Al25Ni10Cu10 amorphous alloy studied by dynamic mechanical analysis
    Jeong, HT
    Kim, JH
    Kim, WT
    Kim, DH
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 385 (1-2): : 182 - 186
  • [3] Mechanical relaxations of a Cu60Zr40 metallic glass studied by using a dynamic mechanical analysis
    H. T. Jeong
    C. O. Park
    Journal of the Korean Physical Society, 2013, 62 : 756 - 761
  • [4] Mechanical relaxations of a Cu60Zr40 metallic glass studied by using a dynamic mechanical analysis
    Jeong, H. T.
    Park, C. O.
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2013, 62 (05) : 756 - 761
  • [5] Microstructures and Mechanical Properties of Tungsten Heavy Alloy Brazed Joints Using Cu-Ti-Ni-Zr Amorphous Filler
    Xu, Yuxin
    Qiu, Xiaoming
    Wang, Suyu
    Su, Jinlong
    Xing, Fei
    SSRN, 2022,
  • [6] Study on the microstructure and mechanical properties of vacuum brazing titanium alloy using Ti-Zr-Cu-Ni amorphous filler metal
    Ren, Ren
    Guo, Fu
    Cui, Ying-Ya
    Xia, Zhi-Dong
    Cailiao Kexue yu Gongyi/Material Science and Technology, 2009, 17 (SUPPL. 1): : 56 - 59
  • [7] Microstructures, mechanical properties and formation mechanisms of tungsten heavy alloy brazed joints using Cu-Ti-Ni-Zr amorphous filler
    Xu, Yuxin
    Qiu, Xiaoming
    Wang, Suyu
    Wu, Chao
    Su, Jinlong
    Xing, Fei
    MATERIALS & DESIGN, 2022, 223
  • [8] Identifying the effects of heat treatment temperatures on the Ti50Ni45Cu5 alloy using dynamic mechanical analysis combined with microstructural analysis
    Fabregat-Sanjuan, Albert
    Gispert-Guirado, Francesc
    Ferrando, Francesc
    De la Flor, Silvia
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 712 : 281 - 291