Glass-forming ability of Pr–(Cu,Ni)–Al alloys in eutectic system

被引：0
|
作者：
Y. Zhang
H. Tan
H. Z. Kong
B. Yao
Y. Li
机构：
[1] National University of Singapore,AMM&NS, Singapore
[2] Faculty of Sciences,Massachusetts Institute of Technology Alliance
[3] National University of Singapore,Department of Materials Science
[4] National University of Singapore,AMM&NS, Singapore
[5] Faculty of Sciences,MIT Alliance
[6] National University of Singapore,Department of Materials Science
来源：
Journal of Materials Research | 2003年 / 18卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A eutectic point in Pr-rich Pr-(Cu,Ni)-Al alloys was experimentally determined by measuring the solidus temperature (Tm) and liquidus temperature (T1). It was found that Pr68(Cu0.5Ni0.5)25Al7 (at.%) is at the eutectic composition in the pseudoternary Pr–(Cu0.5Ni0.5)–Al alloys. The alloy Pr68(Cu0.5Ni0.5)25Al7 exhibits better glass-forming ability (GFA) than the ternary eutectic alloy Pr68Cu25Al7. However, the best GFA was obtained at an off-eutectic composition (Pr54[Cu0.5Ni0.5]30Al16) in the Pr–(Cu0.5Ni0.5)–Al alloys, which can be formed in fully amorphous rods with diameter of 1.5 mm by copper mold casting. Moreover, the glass-transition temperature Tg increases quickly (from 367 to 522 K) with the increasing of the Al content (from 3 to 27 at.%). The deviation of the best GFA composition from the eutectic point [Pr68(Cu0.5Ni0.5)25Al7] was explained in terms of the asymmetric coupled eutectic zone, the competition between growth of crystalline phase and formation of amorphous, and the higher glass-transition temperature Tg on the hypereutectic side.
引用
收藏
页码：664 / 671
页数：7
相关论文
共 50 条
  • [1] Glass-forming ability of Pr-(Cu,Ni)-Al alloys in eutectic system
    Zhang, Y
    Tan, H
    Kong, HZ
    Yao, B
    Li, Y
    [J]. JOURNAL OF MATERIALS RESEARCH, 2003, 18 (03) : 664 - 671
  • [2] The glass-forming ability of Pr-Ni-Al bulk metallic glasses
    Meng, Q. G.
    Zhang, S. G.
    Xia, M. X.
    Li, J. G.
    Bian, X. F.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 438 (1-2) : 77 - 83
  • [3] Effects of Al on the glass-forming ability of Zr-Cu based alloys
    Xing, LQ
    Ochin, P
    Bigot, J
    [J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 1996, 207 : 637 - 640
  • [4] Effect of titanium on glass-forming ability of Cu-Zr-Al alloys
    Men, H
    Kim, WT
    Kim, DH
    [J]. MATERIALS TRANSACTIONS, 2003, 44 (08) : 1647 - 1650
  • [5] GLASS-FORMING ABILITY OF ALLOYS
    INOUE, A
    ZHANG, T
    MASUMOTO, T
    [J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 1993, 156 : 473 - 480
  • [6] Computational thermodynamics to identify Zr-Ti-Ni-Cu-Al alloys with high glass-forming ability
    Cao, Hongbo
    Ma, Dong
    Hsieh, Ker-Chang
    Ding, Ling
    Stratton, William G.
    Voyles, Paul M.
    Pan, Ye
    Cai, Mingdong
    Dickinson, J. Thomas
    Chang, Y. Austin
    [J]. ACTA MATERIALIA, 2006, 54 (11) : 2975 - 2982
  • [7] Effect of Ce addition on the glass-forming ability and thermal stability of Sm-Cu-Ni-Al alloys
    Wang Youquan
    Xiao Xueshan
    Fang Shoushi
    Li Jun
    Li Xufei
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2006, 35 (09) : 1445 - 1448
  • [8] Effect of Pr addition on glass-forming ability of Al-Ni-Zr metallic glass alloy
    Zhang, Chunzhi
    Bian, Xiufang
    Guo, Jing
    Wang, Shenghai
    Song, Kaikai
    Wang, Caidong
    Zhang, Bo
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 436 (1-2) : 95 - 98
  • [9] Effect of Fe on the glass-forming ability, structure and devitrification behavior of Zr-Cu-Al bulk glass-forming alloys
    Louzguine-Luzgin, Dmitri V.
    Xie, Guoqiang
    Zhang, Qingsheng
    Inoue, Akihisa
    [J]. PHILOSOPHICAL MAGAZINE, 2010, 90 (14) : 1955 - 1968
  • [10] Effect of Ni on glass-forming ability of Cu-Ti-based amorphous alloys
    林涛
    姜江
    边秀房
    董瑛
    [J]. Transactions of Nonferrous Metals Society of China, 2006, (03) : 604 - 606
12345