A New Method to Design Cam Used in Automobile Heating, Ventilating and Cooling System

被引：0
|
作者：
Singh B. [1 ]
Singh D. [1 ]
Saini J.S. [1 ]
机构：
[1] Mechanical Engineering Department, Thapar University, Patiala
来源：
Journal of The Institution of Engineers (India): Series C | 2012年 / 93卷 / 04期
关键词：
CAE tools; Cam design; HVAC; Kinematics;
D O I：
10.1007/s40032-012-0040-2
中图分类号：
学科分类号：
摘要：
With the automotive air-conditioning industry aiming at better levels of quality, cost effectiveness and short time to market, the need for simulation is at an all time high. In the present study, the airflow control mechanism of an automotive heating, ventilating and cooling module for opening various doors/dampers were kinematically analyzed. A new method for cam design was developed which is faster and simpler than the existing oscillating link method. The existing design was modified for the same output using the new cam design method. It is shown that the torque required in the modified design is lesser than that in the existing design, thus lowering the effort required to rotate the cam from the control panel. © 2012, The Institution of Engineers (India).
引用
收藏
页码：275 / 286
页数：11
相关论文
共 50 条
  • [1] Design of the NSTX heating and cooling system
    Kalish, M
    Cropper, M
    Neumeyer, C
    Parsells, R
    Dudek, L
    Klink, A
    Morris, L
    19TH IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, PROCEEDINGS, 2002, : 230 - 233
  • [2] Design of digital interface chip based on new bus system used in automobile
    Zhao, Xin-Ming
    Tobias, W.
    Hammerschmidt, D.
    Shenzhen Daxue Xuebao (Ligong Ban)/Journal of Shenzhen University Science and Engineering, 2009, 26 (02): : 182 - 187
  • [3] An automobile heating, ventilating and air conditioning (HVAC) system with a neural network for controlling the thermal sensations felt by a passenger
    Ueda, M
    Taniguchi, Y
    Asano, A
    Mochizuki, M
    Ikegami, T
    Kawai, T
    JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, 1997, 40 (03) : 469 - 477
  • [4] Automobile heating, ventilating and air conditioning (HVAC) system with a neural network for controlling the thermal sensations felt by a passenger
    Ueda, Matsuei
    Taniguchi, Yousuke
    Asano, Akihiko
    Mochizuki, Miyo
    Ikegami, Tohru
    Kawai, Takayoshi
    JSME International Journal, Series B, 1997, 40 (03): : 469 - 477
  • [5] Automobile heating, ventilating and air conditioning (HVAC) system with a neural network for controlling the thermal sensations felt by a passenger
    Toyota Central Research &, Development Lab Inc, Aichi-ken, Japan
    JSME Int J Ser B, 3 (469-477):
  • [6] Storage Tanks: Heating and Cooling System Design
    Das, Apurba Lal
    Mukherjee, Siddhartha
    CHEMICAL ENGINEERING, 2017, 124 (05) : 54 - 61
  • [7] Design and testing of an automobile waste heat adsorption cooling system
    Zhang, LZ
    APPLIED THERMAL ENGINEERING, 2000, 20 (01) : 103 - 114
  • [8] A New Method of Cooling and Heating Load Calculation
    Zhang, Shu
    Zheng, Maoyu
    Wang, Xiao
    Zhang, Wenyong
    6TH INTERNATIONAL SYMPOSIUM ON HEATING, VENTILATING AND AIR CONDITIONING, VOLS I-III, PROCEEDINGS, 2009, : 343 - 350
  • [9] Experimental Investigation of Hybrid Nanofluid Use in Automobile Cooling System and the Effect of New Front Grille Design on Cooling Load
    Kocal, Doruk
    Erdogan, Beytullah
    Kantaroglu, Emrah
    INTERNATIONAL JOURNAL OF THERMOPHYSICS, 2024, 45 (11)
  • [10] New innovative solar heating system (cooling/heating) production
    Niederhaeuser, Elena-Lavinia
    Rouge, Matthias
    Delley, Antoine
    Bruelhart, Harold
    Tinguely, Christian
    INTERNATIONAL CONFERENCE ON SOLAR HEATING AND COOLING FOR BUILDINGS AND INDUSTRY, SHC 2014, 2015, 70 : 293 - 299
12345