Effect of cryogenic assistance on hole shrinkage during Ti6Al4V drilling

被引：0
|
作者：
Johan Merzouki
Gérard Poulachon
Frédéric Rossi
Yessine Ayed
Guillaume Abrivard
机构：
[1] HESAM Université,Arts et Metiers Institute of Technology, LaBoMaP
[2] Airbus Central Research and Technology—Technocampus Composites,undefined
[3] Arts et Metiers Institute of Technology,undefined
[4] LAMPA,undefined
来源：
The International Journal of Advanced Manufacturing Technology | 2020年 / 108卷
关键词：
Drilling; Cryogenic assistance; Liquid nitrogen; Hole shrinkage; Cutting forces; Hole geometry;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This paper focuses on the impact of cryogenic assistance on the drilling of Ti6Al4V titanium alloy. It develops a relation between the phenomenon of hole shrinkage and measurements performed either during or after the machining operation. Indeed, because this phenomenon is apparently strongly associated with heat generation, which is the main issue in titanium alloy drilling, this work proposes to verify the effect of liquid nitrogen cooling on hole shrinkage, quantify it, and then relate it to these measurements. Specifically, the cutting forces and final hole geometry are analyzed and their variations are explained using the collected data on hole shrinkage.
引用
收藏
页码：2675 / 2686
页数：11
相关论文
共 50 条
  • [1] Effect of cryogenic assistance on hole shrinkage during Ti6Al4V drilling
    Merzouki, Johan
    Poulachon, Gerard
    Rossi, Frederic
    Ayed, Yessine
    Abrivard, Guillaume
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 108 (9-10): : 2675 - 2686
  • [2] Method of hole shrinkage radial forces measurement in Ti6Al4V drilling
    Merzouki, Johan
    Poulachon, Gerard
    Rossi, Frederic
    Ayed, Yessine
    Abrivard, Guillaume
    16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO), 2017, 58 : 629 - 634
  • [3] A hybrid modelling approach for characterizing hole shrinkage mechanisms in drilling Ti6Al4V under dry and cryogenic conditions
    Liu, Hongguang
    Birembaux, Helene
    Ayed, Yessine
    Rossi, Frederic
    Poulachon, Gerard
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 118 (11-12): : 3849 - 3868
  • [4] A hybrid modelling approach for characterizing hole shrinkage mechanisms in drilling Ti6Al4V under dry and cryogenic conditions
    Hongguang Liu
    Hélène Birembaux
    Yessine Ayed
    Frédéric Rossi
    Gérard Poulachon
    The International Journal of Advanced Manufacturing Technology, 2022, 118 : 3849 - 3868
  • [5] A sustainable approach in deep hole drilling of Ti6Al4V: Effect of cryogenic cooling on hole parameters and its evaluation
    Ganesh, M.
    Arunkumar, N.
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 121 : 343 - 360
  • [6] Cryogenic turning of Ti6Al4V alloy
    Sola, R.
    Veronesi, P.
    METALLURGIA ITALIANA, 2020, 112 (7-8): : 28 - 36
  • [7] Effect of Phase Transformation upon Hole Making Accuracy of Ti6Al4V by Orbital Drilling
    Yagishita, H.
    Morita, Y.
    46TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 46, 2018, 26 : 152 - 163
  • [8] Experimental analysis of burr formation during Ti6Al4V drilling
    Debard, Benoit
    Rey, Pierre-Andre
    Cherif, Mehdi
    Chiron, Thierry
    Sommier, Alain
    Chavatte, Theo
    MATERIAL FORMING, ESAFORM 2024, 2024, 41 : 2065 - 2074
  • [9] Effect of cryogenic treatment on the tribological properties of EBMed Ti6Al4V
    Huang, Xina
    Ma, Xiaowen
    MATERIALS SCIENCE AND TECHNOLOGY, 2024,
  • [10] Highly Accurate Hole Making Technology of Ti6Al4V by Orbital Drilling: Effect of Oil Mist
    Yagishita, H.
    Osawa, J.
    44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44, 2016, 5 : 195 - 204
12345