Synthesis and characterization of hexanary Ti—Zr—V–Cr—Ni—Fe high-entropy Laves phase

被引:0
|
作者
Shashank Shekhar Mishra
Semanti Mukhopadhyay
Thakur Prasad Yadav
Nilay Krishna Mukhopadhyay
Onkar Nath Srivastava
机构
[1] Banaras Hindu University,Hydrogen Energy Centre, Department of Physics, Institute of Science
[2] Ohio State University,Department of Materials Science and Engineering
[3] Indian Institute of Technology (Banaras Hindu University),Department of Metallurgical Engineering
来源
关键词
D O I
暂无
中图分类号
学科分类号
摘要
Three different high entropy-alloys consisting of six elements (Ti, Zr, V, Cr, Ni, and Fe) with varying Fe content were synthesized by using the RF induction melting technique. All the as-cast, slow-cooled, and rapidly quenched alloys exhibit C14 Laves phase, and it is found to be stable at high temperature. A lattice contraction has been observed with the addition of Fe. To the best of our knowledge, this is the first report on the synthesis of a single-phase high-entropy complex intermetallic compound in the hexanary alloy system. It has been shown that the thermodynamic calculations following Miedema’s approach and the parametric approach utilizing several descriptors comprising configurational entropy, mixing enthalpy, atomic size mismatch, electronegativity, and valence electron concentration favor the stability of the high-entropy multicomponent Laves phase.
引用
收藏
页码:807 / 818
页数:11
相关论文
共 50 条
  • [1] Synthesis and characterization of hexanary Ti-Zr-V-Cr-Ni-Fe high-entropy Laves phase
    Mishra, Shashank Shekhar
    Mukhopadhyay, Semanti
    Yadav, Thakur Prasad
    Mukhopadhyay, Nilav Krishna
    Srivastava, Onkar Nath
    JOURNAL OF MATERIALS RESEARCH, 2019, 34 (05) : 807 - 818
  • [2] Synthesis of a single phase of high-entropy Laves intermetallics in the Ti-Zr-V-Cr-Ni equiatomic alloy
    Yadav, T. P.
    Mukhopadhyay, Semanti
    Mishra, S. S.
    Mukhopadhyay, N. K.
    Srivastava, O. N.
    PHILOSOPHICAL MAGAZINE LETTERS, 2017, 97 (12) : 494 - 503
  • [3] Effect of Cr and Zr on phase stability of refractory Al-Cr-Nb-Ti-V-Zr high-entropy alloys
    Yurchenko, N. Yu.
    Stepanov, N. D.
    Gridneva, A. O.
    Mishunin, M. V.
    Salishchev, G. A.
    Zherebtsov, S. V.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 757 : 403 - 414
  • [4] On the Solidification and Phase Stability of a Co-Cr-Fe-Ni-Ti High-Entropy Alloy
    An-Chou Yeh
    Yao-Jen Chang
    Che-Wei Tsai
    Yen-Chun Wang
    Jien-Wei Yeh
    Chen-Ming Kuo
    Metallurgical and Materials Transactions A, 2014, 45 : 184 - 190
  • [5] On the Solidification and Phase Stability of a Co-Cr-Fe-Ni-Ti High-Entropy Alloy
    Yeh, An-Chou
    Chang, Yao-Jen
    Tsai, Che-Wei
    Wang, Yen-Chun
    Yeh, Jien-Wei
    Kuo, Chen-Ming
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (01): : 184 - 190
  • [6] The Influence of Synthesis Conditions on the Phase Composition, Structure, and Properties of the High-Entropy Ti–Cr–Fe–Ni–Cu Alloy
    M.V. Marych
    G.A. Bagliuk
    A.A. Mamonova
    A.N. Gripachevskii
    Powder Metallurgy and Metal Ceramics, 2019, 57 : 533 - 541
  • [7] The Influence of Synthesis Conditions on the Phase Composition, Structure, and Properties of the High-Entropy Ti-Cr-Fe-Ni-Cu Alloy
    Marych, M. V.
    Bagliuk, G. A.
    Mamonova, A. A.
    Gripachevskii, A. N.
    POWDER METALLURGY AND METAL CERAMICS, 2019, 57 (9-10) : 533 - 541
  • [8] Design and Characterization of Al-Cr-Nb-Ti-V-Zr High-Entropy Alloys for High-Temperature Applications
    Yurchenko, N. Yu
    Panina, E. S.
    Salishchev, G. A.
    Stepanov, N. D.
    PHYSICAL MESOMECHANICS, 2021, 24 (06) : 642 - 652
  • [9] Design and Characterization of Al-Cr-Nb-Ti-V-Zr High-Entropy Alloys for High-Temperature Applications
    N. Yu. Yurchenko
    E. S. Panina
    G. А. Salishchev
    N. D. Stepanov
    Physical Mesomechanics, 2021, 24 : 642 - 652
  • [10] Prediction of the Phase Composition of High-Entropy Аlloys Based on Cr–Nb–Ti–V–Zr Using the Calphad Method
    I. I. Gorbachev
    V. V Popov
    A. Katz-Demyanetz
    V. Popov
    E. Eshed
    Physics of Metals and Metallography, 2019, 120 : 378 - 386