Morphology and tribological properties of Ni/n-SiO2 composite coatings by pulse-reverse current brush-plating

被引：0
|
作者：
Jun Tan
Wen-cai Guo
Hong-jun Yang
Liang Zhou
机构：
[1] National Key Laboratory for Remanufacturing,General Armaments Department
[2] Changsha Military Representative Office,undefined
[3] Wuhan Bureau,undefined
来源：
Journal of Central South University of Technology | 2005年 / 12卷
关键词：
pulse-reverse current(RC); brush-plating; nano composite coating; tribological property; TQ153.2;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Ni/n-SiO2 composite coating was electrodeposited by brush-plating with pulse-reverse current(RC). The morphology, hardness, and tribological properties of the coating were investigated and compared with those of Ni and composite coatings electrodeposited with direct current (DC). The results indicate that Ni/n-SiO2 composite coating electrodeposited by RC, because of RC and the nano powders, has denser coating, finer crystal grains, higher hardness (HV650.0, nearly 1.5 times higher than that of Ni coating electrodeposited by DC) and lower friction coefficient (nearly 0.62), as a result, in the wearing experiment, the Ni/n-SiO2 composite coating electrodeposited by RC has the least worn loss. So this kind of coating has better wear resistance. And RC electro brush-plating can be used as a new technology of brush-plating in the area of wear resistance.
引用
收藏
页码：172 / 175
页数：3
相关论文
共 50 条
  • [1] Morphology and tribological properties of Ni/n-SiO2 composite coatings by pulse-reverse current brush-plating
    谭俊
    郭文才
    杨红军
    周亮
    Journal of Central South University, 2005, (S2) : 172 - 175
  • [2] Morphology and tribological properties of Ni/n-SiO2 composite coatings by pulse-reverse current brush-plating
    Tan, J
    Guo, WC
    Yang, HJ
    Zhou, L
    JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2005, 12 (2): : 172 - 175
  • [3] Study on morphology and tribological properties of Ni/n-SiO2 composite coatings by brush plating
    Tan, J
    Guo, WC
    Xu, BS
    Yang, HJ
    RARE METAL MATERIALS AND ENGINEERING, 2006, 35 (02) : 181 - 185
  • [4] Ni/n-SiO2 Composite Coating Prepared by Brush Plating with Pulse Current
    Tan Jun1
    稀有金属材料与工程, 2012, 41 (S1) : 414 - 417
  • [5] Ni/n-SiO2 Composite Coating Prepared by Brush Plating with Pulse Current
    Tan Jun
    Wu Di
    Yao Qiong
    Fan Wenchao
    RARE METAL MATERIALS AND ENGINEERING, 2012, 41 : 414 - 417
  • [6] Study on the Heat Stability of n-SiO2/Ni Composite Coating by Brush Plating
    郭文才
    谭俊
    常祖鹏
    陈晓华
    材料导报, 2007, (S1) : 75 - 76
  • [7] THE TRIBOLOGICAL PERFORMANCE OF NI/MOS2 COMPOSITE BRUSH-PLATING LAYER IN VACUUM
    ZHANG, XH
    LIU, JJ
    ZHU, BL
    WEAR, 1992, 157 (02) : 381 - 387
  • [8] Study on microstructures and properties of electro, brush-plating composite coatings
    Gu, ZM
    Huang, WJ
    14TH CONGRESS OF INTERNATIONAL FEDERATION FOR HEAT TREATMENT AND SURFACE ENGINEERING, VOLS 1 and 2, PROCEEDINGS, 2004, : 1133 - 1136
  • [9] The Frictional Properties and Mechanism of Nano-diamond/Ni Composite Coatings by Brush-plating
    Li, Ying
    Zou, Wenjun
    Li, Bianxiao
    Dong, Qiming
    MATERIALS PROCESSING TECHNOLOGY, PTS 1-4, 2011, 291-294 : 197 - +
  • [10] Study on Microstructures and Properties of Electro Brush-plating Composite Coatings
    GU Zhuo-ming
    材料热处理学报, 2004, (05) : 1133 - 1136
12345