Erratum: “A comparison of pseudomorphic bcc phase stability in Zr/Nb and Ti/Nb thin film multilayers” [J. Mater. Res. 19, 707 (2004)]

被引：0
|
作者：
G. B. Thompson
R. Banerjee
S. A. Dregia
M. K. Miller
H. L. Fraser
机构：
[1] The Ohio State University,Materials Science and Engineering Department
[2] Oak Ridge National Laboratory,Metals and Ceramic Division
[3] University of Alabama,Department of Metallurgical and Materials Engineering
来源：
Journal of Materials Research | 2004年 / 19卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This article was originally published in [J. Mater. Res. 19, 707 (2004)] and was incorrectly printed. The correct version appears below.
引用
收藏
页码：1582 / 1590
页数：8
相关论文
共 16 条
  • [1] A comparison of pseudomorphic bcc phase stability in Zr/Nb and Ti/Nb thin film multilayers (vol 19, pg 707, 2004)
    Thompson, GB
    Banerjee, R
    Dregia, SA
    Miller, MK
    Fraser, HL
    JOURNAL OF MATERIALS RESEARCH, 2004, 19 (05) : 1582 - 1590
  • [2] A Comparison of Pseudomorphic Bcc Phase Stability in Zr/Nb and Ti/Nb Thin Film Multilayers
    G. B. Thompson
    R. Banerjee
    S. A. Dregia
    M. K. Miller
    H. L. Fraser
    Journal of Materials Research, 2004, 19 : 707 - 715
  • [3] A comparison of pseudomorphic bcc phase stability in Zr/Nb and Ti/Nb thin film multilayers
    Thompson, GB
    Banerjee, R
    Dregia, SA
    Miller, MK
    Fraser, HL
    JOURNAL OF MATERIALS RESEARCH, 2004, 19 (03) : 707 - 715
  • [4] Phase stability of bcc Zr in Nb/Zr thin film multilayers
    Thompson, GB
    Banerjee, R
    Dregia, SA
    Fraser, HL
    ACTA MATERIALIA, 2003, 51 (18) : 5285 - 5294
  • [5] Erratum: “Nanoindentation of bone: Comparison of specimens tested in liquid and embedded in polymethylmethacrylate” [J. Mater. Res. 19, 249 (2004)]
    A. J. Bushby
    V. L. Ferguson
    A. Boyde
    Journal of Materials Research, 2004, 19 : 1581 - 1581
  • [6] Erratum: “Transparent nanocrystalline MgO by rapid and low-temperature spark plasma sintering” [J. Mater. Res., 19, 2527 (2004)]
    Rachman Chaim
    Zhijian Shen
    Mats Nygren
    Journal of Materials Research, 2004, 19 : 3715 - 3715
  • [7] Erratum: “Thermal stability enhancement in nanostructured Cu films containing insoluble tungsten carbides for metallization” [J. Mater. Res. 20, 1379 (2005)]
    J. P. Chu
    Y. Y. Hsieh
    C. H. Lin
    T. Mahalingam
    Journal of Materials Research, 2005, 20 (8) : 2235 - 2235
  • [8] Erratum to: “Deformation and failure of a film/substrate system subjected to spherical indentation: Part II. Prediction of failure modes in a thin TiN film deposited on a compliant elastic substrate” [J. Mater. Res. 21, 783 (2006)]
    S. Math
    V. Jayaram
    S.K. Biswas
    Journal of Materials Research, 2008, 23 : 1185 - 1185
  • [9] Erratum: “Seeded epitaxial growth of ZnO thin films on MgAl2O4 substrates using the chemical solution deposition method” [J. Mater. Res. 22, 943 (2007)]
    Jin Hyeok Kim
    Boram Kim
    David Andeen
    Fred F. Lange
    Journal of Materials Research, 2007, 22 (5) : 1425 - 1425
  • [10] Erratum: “Influence of casting temperature on microstructures and mechanical properties of Cu50Zr45.5Ti2.5Y2 metallic glass prepared using copper mold casting” [J. Mater. Res. 24, 3108 (2009)]
    Zhengwang Zhu
    Haifeng Zhang
    Hao Wang
    Bingzhe Ding
    Zhuang-Qi Hu
    Han Huang
    Journal of Materials Research, 2010, 25 : 605 - 605
12