Additive Manufacturing of Pure Mo and Mo + TiC MMC Alloy by Electron Beam Powder Bed Fusion

被引：0

作者：

Christopher Rock

Edgar Lara-Curzio

Betsy Ellis

Christopher Ledford

Donovan N. Leonard

Rangasayee Kannan

Michael Kirka

Timothy Horn

机构：

[1] Center for Additive Manufacturing and Logistics,Manufacturing Science Division

[2] North Carolina State University,Manufacturing Demonstration Facility

[3] Oak Ridge National Laboratory,Department of Mechanical and Aerospace Engineering

[4] Oak Ridge National Laboratory,undefined

[5] North Carolina State University,undefined

来源：

JOM | 2020年 / 72卷

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A metal matrix composite powder of molybdenum (Mo) + TiC was produced by mechanical alloying (MA) and used in additive manufacturing by electron beam powder bed fusion along with pure Mo powder to form sandwich structures. The Mo + TiC solid layers formed mixed structures of Mo with discrete TiC particles, eutectic Mo + TiC, and Mo dendrites. Thermodynamic modeling showed that the system contained an invariant eutectic reaction in the composition range used and indicated that the system was highly sensitive to changes in composition and temperature.

引用

页码：4202 / 4213

页数：11

共 50 条

[1] Additive Manufacturing of Pure Mo and Mo plus TiC MMC Alloy by Electron Beam Powder Bed Fusion
Rock, Christopher
Lara-Curzio, Edgar
Ellis, Betsy
Ledford, Christopher
Leonard, Donovan N.
Kannan, Rangasayee
Kirka, Michael
Horn, Timothy
[J]. JOM, 2020, 72 (12) : 4202 - 4213
[2] Isothermal γ → ε phase transformation behavior in a Co-Cr-Mo alloy depending on thermal history during electron beam powder-bed additive manufacturing
Zhao, Yufan
Koizumi, Yuichiro
Aoyagi, Kenta
Yamanaka, Kenta
Chiba, Akihiko
[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2020, 50 : 162 - 170
[3] Isothermal γ →ε phase transformation behavior in a Co-Cr-Mo alloy depending on thermal history during electron beam powder-bed additive manufacturing
Yufan Zhao
Yuichiro Koizumi
Kenta Aoyagi
Kenta Yamanaka
Akihiko Chiba
[J]. Journal of Materials Science & Technology, 2020, 50 (15) : 162 - 170
[4] Predictive modeling of laser and electron beam powder bed fusion additive manufacturing of metals at the mesoscale
Zakirov, Andrey
Belousov, Sergei
Bogdanova, Maria
Korneev, Boris
Stepanov, Andrey
Perepelkina, Anastasia
Levchenko, Vadim
Meshkov, Andrey
Potapkin, Boris
[J]. ADDITIVE MANUFACTURING, 2020, 35
[5] Geometry-independent microstructure optimization for electron beam powder bed fusion additive manufacturing
Halsey, William
Ferguson, James
Plotkowski, Alex
Dehoff, Ryan
Paquit, Vincent
[J]. ADDITIVE MANUFACTURING, 2020, 35
[6] Evaluation of monitoring methods for electron beam melting powder bed fusion additive manufacturing technology
Cordero P.M.
Mireles J.
Ridwan S.
Wicker R.B.
[J]. Progress in Additive Manufacturing, 2017, 2 (1-2) : 1 - 10
[7] Asymmetric Cracking in Mar-M247 Alloy Builds During Electron Beam Powder Bed Fusion Additive Manufacturing
Lee, Y. S.
Kirka, M. M.
Kim, S.
Sridharan, N.
Okello, A.
Dehoff, R. R.
Babu, S. S.
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (10): : 5065 - 5079
[8] Asymmetric Cracking in Mar-M247 Alloy Builds During Electron Beam Powder Bed Fusion Additive Manufacturing
Y. S. Lee
M. M. Kirka
S. Kim
N. Sridharan
A. Okello
R. R. Dehoff
S. S. Babu
[J]. Metallurgical and Materials Transactions A, 2018, 49 : 5065 - 5079
[9] Laser-based powder bed fusion additive manufacturing of pure copper
Jadhav, Suraj Dinkar
Goossens, Louca Raphael
Kinds, Yannis
Van Hooreweder, Brecht
Vanmeensel, Kim
[J]. ADDITIVE MANUFACTURING, 2021, 42
[10] Temperature Measurements in Powder-Bed Electron Beam Additive Manufacturing
Price, Steven
Lydon, James
Cooper, Ken
Chou, Kevin
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 2A, 2014,

← 1 2 3 4 5 →