Energy consumption for deformation to fracture of a circular-clamped thin plate under impact loading

被引：0
|
作者：
Stepanov G.V. [1 ]
Zubov V.I. [1 ]
Olisov A.N. [1 ]
Klepaczko J.R. [2 ]
机构：
[1] Institute of Problems of Strength, National Academy of Sciences of Ukraine, Kiev
[2] Laboratoire de Physique et Mecanique des Materiaux, Université de Metz, Metz
来源：
Strength of Materials | 2001年 / 33卷 / 02期
关键词：
energy consumption; flexure; fracture; impact loading; strength; thin plate;
D O I：
10.1023/A:1010484416070
中图分类号：
学科分类号：
摘要：
An experimental procedure for evaluating energy spent for fracture of a circular-clamped sheet structural element upon transverse flexure, induced by impact loading of a spherical head-face body, is briefly outlined. Flexure test results for two sheet metals (a 20 mild steel and a D16T aluminum alloy 1.0 and 0.75 mm thick, respectively) and a 2.0-mm PA6 shock-resistant composite are cited. Experimental data analyses and stress-strain state calculations for a plate material within the circular boundary upon flexure made it possible to establish the relation between the work of deformation and the dynamic strength and plasticity. Sheet structural element materials are comparatively evaluated by their specific energy spent for deformation under transverse static and impact loading. © 2001 Plenum Publishing Corporation.
引用
收藏
页码：157 / 164
页数：7
相关论文
共 50 条
  • [1] Pre-fracture deformation energy consumption in a thin plate with clamped circular boundary under impact loading conditions
    Stepanov, G.V.
    Zubov, V.I.
    Olisov, A.N.
    Klepaczko, J.R.
    Problemy Prochnosti, 2001, (02): : 88 - 99
  • [2] CLAMPED THIN RECTANGULAR PLATE UNDER TRANSVERSE LOADING
    GAYDON, FA
    QUARTERLY JOURNAL OF MECHANICS AND APPLIED MATHEMATICS, 1966, 19 : 65 - &
  • [3] Deformation and tearing of clamped circular work-hardening plates under impulsive loading
    Wen, HM
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 1998, 75 (01) : 67 - 73
  • [4] Deformation and failure of thin plate structures under blast loading
    Xu, Zixi
    Liu, Yan
    Huang, Fenglei
    ADVANCES IN MECHANICAL ENGINEERING, 2019, 11 (01)
  • [5] Inelastic failure of fully clamped beams and circular plates under impact loading
    Jones, N
    Jones, C
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2002, 216 (02) : 133 - 149
  • [6] New Analytical Solution of the Large Deflection Problem of a Circular Thin Plate with Edge Clamped but Sliding Freely Under a Combined Loading
    Zhao, Chu
    Yun, Yin-shan
    MATHEMATICAL PROBLEMS IN ENGINEERING, 2022, 2022
  • [7] DEFORMATION AND FAILURE OF CLAMPED BEAMS UNDER LOW-SPEED IMPACT LOADING
    WEN, HM
    REDDY, TY
    REID, SR
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 1995, 16 (03) : 435 - 454
  • [8] A generalized model for dynamic deformation and failure of clamped beam under impact loading
    Sen, Subhajit
    Shaw, Amit
    PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2018, 474 (2215):
  • [9] FRACTURE BEHAVIOR OF BRITTLE CIRCULAR DISK UNDER IMPACT LOADING
    ODA, J
    YAMAZAKI, K
    KOSHINO, K
    KUROYANAGI, O
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1978, 21 (155): : 781 - 787
  • [10] Deformation and fracture of square plates under repetitive impact loading
    Breslavsky, D.
    Morachkovsky, O.
    Naumov, I.
    Ganilova, O.
    INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 2018, 98 : 180 - 188
12345