Oxidation Behavior of In Situ-Synthesized (TiB+TiC)/Ti6242 Composites

被引：0
|
作者：
YeXia Qin
Di Zhang
WeiJie Lu
Wei Pan
机构：
[1] Tsinghua University,State Key Laboratory of New Ceramics and Fine Processing
[2] Shanghai Jiao Tong University,State Key Laboratory of Metal Matrix Composites
来源：
Oxidation of Metals | 2006年 / 66卷
关键词：
high-temperature oxidation; -synthesized; titanium-matrix composites; oxide scale.;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The oxidation behaviors of TiB and TiC particle-reinforced, titanium-matrix composites (TMCs) were studied in air at 550–650°C, The oxidation kinetics follow approximately a parabolic rate law. The oxidation rates, which were lower than those of Ti6242, decrease gradually as oxidation proceeds. The oxide scales formed on TMCs were predominantly rutile and α-Al2O3. No B2O3 and other oxides were observed within the oxide scale. The in situ-synthesized TiB and TiC reinforcements can increase the oxidation resistance of TMCs. The oxide scales that formed exhibited excellent spallation resistance under all testing conditions. No scale cracking or spallation could be observed, implying that growth and thermal stresses generated during heating and cooling have been effectively released. The mechanisms of the decrease in oxidation rate and the improvement on spallation resistance are discussed based on microstructure studies.
引用
收藏
页码：253 / 268
页数：15
相关论文
共 50 条
  • [1] Oxidation behavior of in situ-synthesized (TiB+TiC)/Ti6242 composites
    Qin, YeXia
    Zhang, Di
    Lu, WeiJie
    Pan, Wei
    OXIDATION OF METALS, 2006, 66 (5-6): : 253 - 268
  • [2] Oxidation behavior of (TiB+TiC)/Ti6242 matrix composites at elevated temperature
    Qin Yexia
    Lu Weijie
    Xu Dong
    Zhang Di
    RARE METAL MATERIALS AND ENGINEERING, 2006, 35 (10) : 1647 - 1650
  • [3] Microstructure and tensile properties of in situ (TiB+TiC)/Ti6242 (TiB:TiC=1:1) composites prepared by common casting technique
    Lu, WJ
    Zhang, D
    Zhang, XN
    Wu, RJ
    Sakata, T
    Mori, H
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 311 (1-2): : 142 - 150
  • [4] Fabrication and mechanical properties of in-situ synthesized (TiB+TiC)/Ti-6242 metal matrix composites
    Zhang, XN
    JOURNAL OF ADVANCED MATERIALS, 2005, 37 (01): : 11 - 15
  • [5] Superplastic behavior of in situ synthesized (TiB+TiC)/Ti matrix composite
    Minmin Wang Yuexin Luo Bo Ji Feng Zhu Special Steel Branch
    Baosteel Technical Research, 2007, (01) : 55 - 59
  • [6] Growth mechanism of reinforcements in in-situ synthesized (TiB+TiC)/Ti composites
    吕维洁
    张荻
    张小农
    郭淑玲
    吴人洁
    Transactions of Nonferrous Metals Society of China, 2001, (01) : 67 - 71
  • [7] Strengthening behavior of in situ-synthesized (TiC-TiB)/Ti composites by powder metallurgy and hot extrusion
    Li, Shufeng
    Kondoh, Katsuyoshi
    Imai, Hisashi
    Chen, Biao
    Jia, Lei
    Umeda, Junko
    Fu, Yabo
    MATERIALS & DESIGN, 2016, 95 : 127 - 132
  • [8] 原位合成(TiB+TiC)/Ti6242基复合材料高温氧化行为
    覃业霞
    吕维洁
    徐栋
    张荻
    稀有金属材料与工程, 2006, (10) : 1647 - 1650
  • [9] Oxidation behavior of in situ synthesized (TiB plus TiC)/Ti-Al composites
    Qin, YeXia
    Zhang, Di
    Lu, WeiJie
    Pan, Wei
    MATERIALS LETTERS, 2006, 60 (19) : 2339 - 2345
  • [10] Microstructure and tribological behavior of in situ synthesized (TiB+TiC)/Ti6Al4V (TiB/TiC=1/1) composites
    Zheng, Bowen
    Dong, Fuyu
    Yuan, Xiaoguang
    Huang, Hongjun
    Zhang, Yue
    Zuo, Xiaojiao
    Luo, Liangshun
    Wang, Liang
    Su, Yanqing
    Li, Weidong
    Liaw, Peter K.
    Wang, Xuan
    TRIBOLOGY INTERNATIONAL, 2020, 145
12345