Insights into microbial community in microbial fuel cells simultaneously treating sulfide and nitrate under external resistance

The effect of electricity, induced by external resistance, on microbial community performance is investigated in Microbial Fuel Cells (MFCs) involved in simultaneous biotransformation of sulfide and nitrate. In the experiment, three MFCs were operated under different external resistances (100 Ω, 1000 Ω and 10,000 Ω), while one MFC was operated with open circuit as control. All MFCs demonstrate good capacity for simultaneous sulfide and nitrate biotransformation regardless of external resistance. MFCs present similar voltage profile; however, the output voltage has positive relationship with external resistance, and the MFC1 with lowest external resistance (100 Ω) generated highest power density. High-throughput sequencing confirms that taxonomic distribution of suspended sludge in anode chamber encompass phylum level to genus level, while the results of principal component analysis (PCA) suggest that microbial communities are varied with external resistance, which external resistance caused the change of electricity generation and substrate removal at the same, and then leads to the change of microbial communities. However, based on Pearson correlation analyses, no strong correlation is evident between community diversity indices (ACE index, Chao index, Shannon index and Simpson index) and the electricity (final voltage and current density). It is inferred that the performance of electricity did not significantly affect the diversity of microbial communities in MFCs biotransforming sulfide and nitrate simultaneously.