GLONASS pseudorange inter-channel biases considerations when jointly estimating GPS and GLONASS clock offset

GLONASS clock offset estimation is affected by the inter-channel biases (ICBs) caused by frequency division multiple access technique. The effect of ICBs on joint GPS/GLONASS clock offset estimation is analyzed. An efficient approach for joint estimation of GPS/GLONASS satellite clock offset is applied to the generation of 30-s clock offset products. During the estimation, the following three ICB handling strategies were tested: calculating ICBs for each GLONASS signal channel, calculating ICBs for each GLONASS satellite and neglecting ICBs. The behavior of ICBs under different strategies was statistically stable. Subsequently, the clock offset products using different ICB strategies were evaluated. The evaluation shows that consideration of the ICB is important when estimating the clock offset. Furthermore, estimating one ICB for each GLONASS satellite is better than estimating one for each GLONASS signal channel because, with the former strategy, the clock offset products behave more smoothly and have higher accuracy compared with products from the International GNSS Service Analysis Center. In addition, precise point positioning, using clock offsets based on one ICB for each GLONASS satellite, has the highest positioning accuracy.