Influence of the second phase on the room-temperature tensile and creep deformation mechanisms of α-β titanium alloys, part II: Creep deformation

This work focuses on the effect of the second phase on the ambient temperature creep deformation mechanisms of titanium alloys, using Ti-6.0 wt pct Mn and Ti-8.1 wt pct V with Widmanstätten microstructures as the model systems. In Part I it was observed that the presence of a second phase can affect the tensile deformation behavior. Likewise, the creep deformation mechanisms of the two-phase alloys differ from the mechanisms of single-phase alloys. These α-β deformation mechanisms include twinning in fine grains of the α phase and stress-induced hexagonal martensite in the β phase of Ti-8.1 V. This is the first time that twinning in the α phase and stress-induced martensite in the β phase are reported as creep deformation mechanisms in an α-β titanium alloy. Several factors, including elastic interaction effects, shear stress due to deformation products in adjacent phases, and the stability of the β phase, affect the creep deformation mechanisms in these alloys. Models for the time-dependent growth of martensite are suggested. In addition, the difference between tensile and creep deformation in regard to accumulation of stresses to reach the critical stresses is described.