Formation of submicrocrystalline structure in titanium and titanium alloys and their mechanical properties

被引：0
|
作者：
G. A. Salishchev
R. M. Galeev
S. P. Malysheva
S. V. Zherebtsov
S. Yu. Mironov
O. R. Valiakhmetov
É. I. Ivanisenko
机构：
[1] Institute for Problems of Superplasticity of Metals of the Russian Academy of Sciences,
来源：
Metal Science and Heat Treatment | 2006年 / 48卷
关键词：
Titanium Alloy; Flow Stress; Deformation Temperature; Severe Plastic Deformation; Equal Channel Angular Pressing;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effect of deformation temperature on the grain size in titanium VT1-0 and double-phase titanium alloy VT6 is studied. The temperature-and-rate modes of formation of submicrocrystalline structure are determined. The mechanical behavior and the evolution of the microstructure in the course of warm severe deformation is investigated by means of successive compression of specimens over three orthogonal directions at a temperature of 400°C for titanium and 550°C for alloy VT6. The mechanisms of grain refinement in severe deformation are determined. It is shown that they differ depending on the composition of the alloy. The method of “abc”-deformation is used for fabricating large-mass preforms from titanium VT1-0 and alloy VT6 with submicrocrystalline structure; large-size sheets are produced from alloy VT6.
引用
收藏
页码：63 / 69
页数：6
相关论文
共 50 条
  • [1] Formation of submicrocrystalline structure in titanium and titanium alloys and their mechanical properties
    Salishchev, G. A.
    Galeev, R. M.
    Malysheva, S. P.
    Zherebtsov, S. V.
    Mironov, S. Yu.
    Valiakhmetov, O. R.
    Ivanisenko, E. I.
    [J]. METAL SCIENCE AND HEAT TREATMENT, 2006, 48 (1-2) : 63 - 69
  • [2] Formation of submicrocrystalline structure in titanium aluminides and their mechanical properties
    Salishchev, G. A.
    Imayev, R. M.
    Imayev, V. M.
    Shagiev, M. R.
    Froes, F. H. Sam
    [J]. HIGH PRESSURE TECHNOLOGY OF NANOMATERIALS, 2006, 114 : 29 - 38
  • [3] Formation of submicrocrystalline structure in titanium during plastic deformation and its effect on mechanical properties
    Salischev, GA
    Valiakhmetov, OR
    Galeev, RM
    Malysheva, SP
    [J]. RUSSIAN METALLURGY, 1996, (04): : 78 - 82
  • [4] Peculiar effects of plastic deformation by cold rolling on structure and mechanical properties of submicrocrystalline and titanium alloys
    I. V. Ratochka
    O. N. Lykova
    G. P. Grabovetskaya
    [J]. Russian Physics Journal, 2011, 54 : 423 - 429
  • [5] PECULIAR EFFECTS OF PLASTIC DEFORMATION BY COLD ROLLING ON STRUCTURE AND MECHANICAL PROPERTIES OF SUBMICROCRYSTALLINE AND TITANIUM ALLOYS
    Ratochka, I. V.
    Lykova, O. N.
    Grabovetskaya, G. P.
    [J]. RUSSIAN PHYSICS JOURNAL, 2011, 54 (04) : 423 - 429
  • [6] Formation of submicrocrystalline structure in large size billets and sheets out of titanium alloys
    Salishchev, GA
    Galeyev, RM
    Zherebtsov, SV
    Mironov, SY
    Valiakhmetov, OR
    Malysheva, SP
    [J]. METALLIC MATERIALS WITH HIGH STRUCTURAL EFFICIENCY, 2004, 146 : 401 - 412
  • [7] MECHANICAL-PROPERTIES OF TITANIUM BT8 ALLOY WITH SUBMICROCRYSTALLINE STRUCTURE
    VALIAKHMETOV, OR
    GALEYEV, RM
    SALISHCHEV, GA
    [J]. FIZIKA METALLOV I METALLOVEDENIE, 1990, (10): : 204 - 206
  • [8] Editorial: Structure and Mechanical Properties of Titanium Alloys and Titanium Matrix Composites (TMCs)
    Xie, Lechun
    Wang, Liqiang
    Zhang, Lai-Chang
    Lu, Weijie
    [J]. FRONTIERS IN MATERIALS, 2020, 7
  • [9] FORMATION OF SUBMICROCRYSTALLINE STRUCTURE IN THE TITANIUM-ALLOY VT8 AND ITS INFLUENCE ON MECHANICAL-PROPERTIES
    SALISHCHEV, GA
    VALIAKHMETOV, OR
    GALEYEV, RM
    [J]. JOURNAL OF MATERIALS SCIENCE, 1993, 28 (11) : 2898 - 2902
  • [10] STRUCTURE AND MECHANICAL-PROPERTIES OF TITANIUM-ALLOYS
    KIMURA, H
    [J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (05): : S738 - S739
12345