Geomechanical optimization of hydraulic fracturing in unconventional reservoirs: a semi-analytical approach

Unconventional drilling and completion architecture includes drilling multilateral horizontal wells in the direction of minimum horizontal stress and simultaneous multistage fracturing treatments perpendicular to the wellbore. This drilling and stimulation strategy is utilized in order to raise the connectivity of the reservoir to the wellbore, thereby remedying the low permeability problem, increasing reserve per well, enhancing well productivity, and improving project economics in this type of reservoir. However, in order to have the highest production with the least cost, an optimization technique should be used for the fracturing treatment. According to the fact that aperture, propagation direction, and propagation potential of hydraulic fractures are of paramount importance in optimization of the fracking treatment, in this research paper, these three major factors are studied in detail, the control variables on these three factors are examined, and the effect of each factor is quantified by proposing a complete set of equations. Using the proposed set of equations, one can make a good estimate about the fracture aperture (directly controlling the fracture conductivity), the stress shadow size (directly controlling the fracture path), and the change of stress intensity factor (directly controlling the fracture propagation potential). A geomechanical optimization procedure is then presented for toughness-dominated and viscosity-dominated regimes based on the proposed equations that can be used for estimation of different optimal fracturing patterns. The most efficient fracturing pattern can be determined afterward via considering the cumulative production using a reservoir simulator e.g. ECLIPSE, Schlumberger. This procedure is likely to offer an optimal simultaneous multistage hydraulic fracture treatment without deviation or collapse, with no fracture trapping, with the highest possible propagation potential in the hydrocarbon producing shale layer, and a predicted aperture for proppant type/size decision and conductivity of the fractures.