Inclusions properties at 1673 K and room temperature with Ce addition in SS400 steel

被引：0
|
作者：
Fei Pan
Hao-Long Chen
Yen-Hsun Su
Yen-Hao Su
Weng-Sing Hwang
机构：
[1] National Cheng Kung University,Department of Materials Science and Engineering
[2] Technische Universität München,Physics Department
[3] Ludwig-Maximilians-Universität München,Physics Department
[4] Kao Yuan University,Department of Electronic Engineering
[5] China Steel Corporation,Steelmaking Process Development Section
来源：
Scientific Reports | / 7卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Inclusion species formed in SS400 steel with Ce-addition was predicted by thermodynamic calculation. The analysis of the inclusion morphology and size distribution was carried out by applying Scanning Electron Microscopy (SEM) and Transmission Electron Microscope (TEM). Nano-Fe3O4 particles were also found in cerium-deoxidized and -desulfurized steel and their shapes were nearly spherical. The complex Ce2O3 inclusions covering a layer of 218 nm composed by several MnS particles with similar diffraction pattern. Most importantly, the complex Ce2O3 characterized by using TEM diffraction is amorphous in the steel, indicating that Ce2O3 formed in the liquid iron and then MnS segregated cling to it.
引用
收藏
相关论文
共 50 条
  • [1] Inclusions properties at 1673 K and room temperature with Ce addition in SS400 steel
    Pan, Fei
    Chen, Hao-Long
    Su, Yen-Hsun
    Su, Yen-Hao
    Hwang, Weng-Sing
    SCIENTIFIC REPORTS, 2017, 7
  • [2] Research on micro inclusions of SS400 steel in slag washing process
    Wang, Shuoming
    Huo, Yanpeng
    Wang, Shumin
    ADVANCED ENGINEERING MATERIALS II, PTS 1-3, 2012, 535-537 : 706 - +
  • [3] Mechanical properties research of super-steel SS400
    Technical Center, Benxi Iron and Steel Co., Ltd., Benxi 117000, China
    Kang T'ieh, 2006, SUPPL. 2 (414-418):
  • [4] EBSD analysis of magnesium addition on inclusion formation in SS400 structural steel
    Luo, Sin-Jie
    Su, Yen-Hao Frank
    Lu, Muh-Jung
    Kuo, Jui-Chao
    MATERIALS CHARACTERIZATION, 2013, 82 : 103 - 112
  • [5] Numerical simulation and verification of welding temperature distribution of SS400 steel
    Lu, Hengchang
    Xing, Shuqing
    Ma, Yonglin
    Chen, Zhongyi
    Hanjie Xuebao/Transactions of the China Welding Institution, 2015, 36 (05): : 65 - 68
  • [6] The Influence of Mg-Based Inclusions on the Grain Boundary Mobility of Austenite in SS400 Steel
    Lai, Chih-Ting
    Lai, Hsuan-Hao
    Su, Yen-Hao Frank
    Huang, Fei-Ya
    Lin, Chi-Kang
    Kuo, Jui-Chao
    Lee, Hwa-Teng
    METALS, 2019, 9 (03)
  • [7] Optical inclusion transformation with different amount of cerium addition during solidification of SS400 steel
    Fei Pan
    Yen-Hao Su
    James Augusto
    Weng-Sing Hwang
    Hao-Long Chen
    Optical and Quantum Electronics, 2016, 48
  • [8] Optical inclusion transformation with different amount of cerium addition during solidification of SS400 steel
    Pan, Fei
    Su, Yen-Hao
    Augusto, James
    Hwang, Weng-Sing
    Chen, Hao-Long
    OPTICAL AND QUANTUM ELECTRONICS, 2016, 48 (12)
  • [9] High Temperature Rapid Tempering Process of SS400 Steel With Thermomechanical Simulation Tester
    XING Shu-qing1
    2. The State Key Laboratory of Rolling and Automation
    JournalofIronandSteelResearch(International), 2012, 19 (02) : 43 - 49
  • [10] High Temperature Rapid Tempering Process of SS400 Steel With Thermomechanical Simulation Tester
    Xing S.-Q.
    Chen Z.-Z.
    Ma Y.-L.
    Li H.-Q.
    Journal of Iron and Steel Research International, 2012, 19 (2) : 43 - 49
12345