Low-velocity impact behavior of two-way SFRC slabs strengthened with steel plate

Structural systems and structural elements can often suffer severe damage or even completely collapse under the effect of sudden dynamic impact loading, which is a different type of loading that is not considered during their design. Research on how structures behave under impact loading and how they can be strengthened to perform better against this type of loading has increased to avoid such undesirable severe damage. Within the scope of this study, it is aimed to improve the behavior and increase the performance of two-way steel fiber-reinforced concrete (SFRC) slabs, one of the leading structural elements that can be affected by impact loading, using steel fiber concrete (SFC) and placing steel plates on the surface of the RC slab. Within the scope of the study, the effects of placing FRC as layers in different positions within the slab and placing the steel plate on different surfaces of the slabs were examined. Impact loading was applied using a drop weight test setup designed by the authors, and the acceleration-time, displacement-time, and impact loading-time behaviors of the RC slabs were measured and interpreted. The use of fiber concrete in RC slabs and strengthened with steel plates increased the maximum acceleration values by an average of 3% and 113%, respectively. The use of fiber concrete in RC slabs reduced the maximum displacement and residual displacement values by an average of 2% and 25%, respectively. Placing steel plates on the slabs reduced the maximum displacement and residual displacement values by an average of 270% and 199%, respectively. In addition, the energy absorption capacities of RC slabs were calculated, and how they were affected by experimental variables was examined. Numerical analyses of the RC slabs tested in the study were also conducted using ABAQUS finite element software, and the results obtained were compared with the experimental ones.