Granulation of activated sludge in a continuous flow airlift reactor by strong drag force

Most aerobic granule cultivation has been based on the sequencing batch reactor (SBR) and then the factors that affect aerobic granulations were developed in the SBR. However, little work has been done to cultivate aerobic granules in a continuous-flow bioreactor with simple structure that is realistic for engineering. This work is the first to cultivate aerobic granules in a continuous flow airlift fluidized bed reactor (CAFB) possesses a very simple structure and without settling time and starvation time controlling. The configuration of CAFB was the simplest continuous-flow aerobic granular bioreactor reported by now. The majority of granules could be formatted in the CAFB after 12 days cultivation. The effluent COD concentration maintained at 50 ± 10 mg/L for the variable COD loading rate of 3.5 g COD/L/d and 4.8 g COD/L/d, which confirmed that the CAFB performed good anti-shock abilities. CAFB performed good nitrification ability, however, little denitrification was found under the operating conditions of this study. The shear stress acting on the solid phase were hundreds of times stronger in the CAFB than in the SBR at the same aeration strength. It seems CAFB is very efficient for granulation due to the strong shear-force exertion, which is promising for continuous-flow aerobic granular bioreactor. Protein, positive to the hydrophobicity, was predominant in extracellular polymeric substances in the granules, and favored the granules formation in the CAFB combined with the polysaccharides. However, filamentous bulking always happened in 35 days operation of the CAFB, thus further study on the stability of this bioreactor is urgently necessary.