The non-interference uniform speed rope drilling coring device is a tool for investigating samples of submarine underground leakage hydrate rock formations. In the process of coring, the penetration resistance of the shoe is large, and the rock stratum is disturbed, which results in disturbance of the rock sample's original state. In order to solve this problem, the standard core diameter is ∅72 mm and the length is the length of a single cylinder. For example, a drilling coring device with a working outer diameter d not more than 90 mm is used to optimize the size and structure of the shoe. To ensure the strength of the tube shoe, the related dimensions of the shoe were optimized using finite element analysis software, and the structure of the shoe was improved based on the optimized dimensions. The results of the size optimization are: á = 20 °, 11 = 13mm, and ä = 1.5mm: the structural improvement results are: the front cone surface at the lower end of the rube shoe is changed to a regular mesa, and the number of regular mesa sides is 32. The LS-DYNA dynamic simulation results show that the penetration resistance of the tube shoe after size optimization and structure improvement is significantly reduced, so the disturbance of the drilling and coring device to the rock formation is also reduced, and the quality of the sample is improved.
