Silica Behavior in the Alumina Carbothermic Reduction-chlorination Process

被引:1
|
作者
Zhu, Fulong [1 ,2 ,3 ]
Yang, Bin [1 ,2 ]
Yuan, Haibin [1 ,2 ,3 ]
Yu, Qingchun [1 ,2 ]
Xu, Baoqiang [1 ,2 ]
Dai, Yongnian [1 ,2 ]
机构
[1] Kunming Univ Sci & Technol, Natl Engn Lab Vacuum Met, Kunming 650093, Peoples R China
[2] Kunming Univ Sci & Technol, Key Lab Nonferrous Met Vacuum Met Yunnan Prov, Kunming 650093, Peoples R China
[3] Kunming Univ Sci & Technol, Fac Mat Sci & Engn, Kunming 650093, Peoples R China
基金
高等学校博士学科点专项科研基金;
关键词
Compendex;
D O I
10.1007/s11837-011-0122-2
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The behavior of silica was investigated experimentally in an alumina carbothermic reduction process and chlorination process in vacuum. The results showed that, first, SiC was produced by SiO2 and C, and then Al4SiC4 was produced by Al4C3, Al4O4C, C, and SiC during the alumina carbothermic reduction process at about 1,763 K. C, Al3C4 and Al4O4C decreased and Al4SiC4 increased as content of SiO2 increased. The following chlorination process was blocked, and the recovery rate of aluminum decreased quickly compared with that without silica. It was inferred that silica might be unfavorable for aluminum extracted from alumina by carbothermic reduction-chlorination process in vacuum at about 1763 K.
引用
收藏
页码:119 / 122
页数:4
相关论文
共 50 条
  • [1] Behavior analysis of silica in aluminum production by alumina carbothermic reduction-chlorination process in vacuum
    Zhu, F. L.
    Yang, B.
    Li, Y.
    Yuan, H. B.
    Yu, Q. C.
    Xu, B. Q.
    Dai, Y. N.
    VACUUM, 2011, 85 (10) : 968 - 971
  • [2] Behavior of titanium dioxide in alumina carbothermic reduction-chlorination process in vacuum
    Zhu Fu-long
    Yuan Hai-bin
    Yu Qing-chun
    Yang Bin
    Xu Bao-qiang
    Dai Yong-nian
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 (08) : 1855 - 1859
  • [3] Aluminum production by alumina carbothermic reduction-chlorination in vacuum
    Yuan H.
    Zhu F.
    Yang B.
    Yu Q.
    Xu B.
    Dai Y.
    Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2010, 30 (06): : 582 - 587
  • [4] STUDY ON MECHANISM OF ALUMINUM PRODUCTION BY ALUMINA CARBOTHERMIC REDUCTION-CHLORINATION PROCESS IN VACUUM
    Zhu, Fulong
    Yang, Bin
    Yu, Qingchun
    Xu, Baoqiang
    Dai, Yongnian
    EPD CONGRESS 2011, 2011, : 613 - 620
  • [5] Behavior of Fe2O3 in Al extraction by alumina carbothermic reduction-chlorination in vacuum
    Zhu F.
    Yu Q.
    Yang B.
    Yuan H.
    Xu B.
    Dai Y.
    Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2011, 31 (04): : 485 - 489
  • [6] Vacuum metallurgy of Al from bauxite by carbothermic reduction-chlorination
    Wang, Pingyan
    Liu, Mousheng
    Dai, Yongnian
    Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2006, 26 (05): : 377 - 380
  • [7] Carbothermic Reduction and Chlorination of Alumina with Coal in Vacuum
    Yu Qingchun
    Wang Pingyan
    Yang Bin
    Cui Chonglong
    Zhang Han
    Wang Chen
    MANUFACTURING SCIENCE AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 443-444 : 862 - +
  • [8] Effects of Fe2O3, SiO2 and TiO2 on aluminum produced by alumina carbothermic reduction-chlorination process in vacuum
    Yuan, Hai-Bin
    Zhu, Fu-Long
    Yu, Qing-Chun
    Li, Qiu-Xia
    Xu, Bao-Qiang
    Yang, Bin
    Dai, Yong-Nian
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2010, 20 (09): : 1836 - 1842
  • [9] Thermal behavior of alumina in process of carbothermic reduction and chloride to produce aluminum
    Yuan, Hai-Bin
    Feng, Yue-Bin
    Yang, Bin
    Yu, Qing-Chun
    Xu, Bao-Qiang
    Wang, Peng-Cheng
    Dai, Yong-Nian
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2010, 20 (04): : 777 - 783
  • [10] Comparative study on the metal aluminum produced from alumina by carbothermic reduction and carbothermic-chlorination
    Yu, Qingchun
    Yang, Bin
    Deng, Yong
    Wang, Fei
    Xiong, Heng
    Chen, Minxiu
    4TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2013, : 287 - 292