Optimization of Flame Retardancy & Mechanical Performance of Jute-glass/Epoxy Hybrid Composites

被引：0
|
作者：
Muhammad Umair
Ayesha Shahbaz
Ahsan Ahmad
Sohaib Arif
Khubab Shaker
Madeha Jabbar
Yasir Nawab
机构：
[1] National Textile University,Department of Textile Engineering, Textile Composite Materials Research Group, National Center for Composite Materials, School of Engineering and Technology
来源：
Fibers and Polymers | 2022年 / 23卷
关键词：
Zirconium phosphate; Jute-glass composites; Flame retardancy; Mechanical performance; Hybrid composite;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
One of the limiting factors of natural fiber composites is their lower flame retardancy (FR) and mechanical strength as compared to the glass and other synthetic fiber composites. In this research, FR and mechanical properties of the hybrid jute-glass/epoxy composites were optimized. In the first part, different percentages (1 %, 2 % & 3 %) of zirconium phosphate (ZrP) particles were mixed in epoxy resin to optimize the flame retardancy and mechanical properties of jute/epoxy composites. 3 % ZrP loaded composite showed improved FR and mechanical (tensile and impact) properties followed by 2 % and 1 % respectively. In the second part, optimized percentage of ZrP particles (3 %) was used to fabricate two (02) jute-glass hybrid epoxy composites, and their mechanical (tensile, flexural and impact) and FR properties were evaluated. Hybrid (H1) samples showed better mechanical and FR properties due to presence of glass layer on the outer side of composite with 3 % ZrP particles loading.
引用
收藏
页码：2866 / 2874
页数：8
相关论文
共 50 条
  • [1] Optimization of Flame Retardancy & Mechanical Performance of Jute-glass/Epoxy Hybrid Composites
    Umair, Muhammad
    Shahbaz, Ayesha
    Ahmad, Ahsan
    Arif, Sohaib
    Shaker, Khubab
    Jabbar, Madeha
    Nawab, Yasir
    [J]. FIBERS AND POLYMERS, 2022, 23 (10) : 2866 - 2874
  • [2] Mechanical properties of interply and intraply hybrid laminates based on jute-glass/epoxy composites
    Altaee M.A.
    Mostafa N.H.
    [J]. J. Eng. Appl. Sci., 2023, 1 (1):
  • [3] Effect of cenosphere addition on the mechanical properties of jute-glass fiber hybrid epoxy composites
    Dalbehera, Soma
    Acharya, S. K.
    [J]. JOURNAL OF INDUSTRIAL TEXTILES, 2016, 46 (01) : 177 - 188
  • [4] Impact of stacking sequence on tribological wear performance of woven jute-glass hybrid epoxy composites
    Dalbehera, Soma
    Acharya, S. K.
    [J]. TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2015, 9 (04) : 196 - 201
  • [5] Tensile and fatigue properties of Jute-Glass hybrid fibre reinforced epoxy composites
    Mostafa, Nawras H.
    [J]. MATERIALS RESEARCH EXPRESS, 2019, 6 (08):
  • [6] Mechanical properties of woven jute-glass hybrid-reinforced epoxy composite
    Gujjala, Raghavendra
    Ojha, Shakuntala
    Acharya, S. K.
    Pal, S. K.
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2014, 48 (28) : 3445 - 3455
  • [7] Impact of Cenosphere on the Erosion Wear Response of Woven Hybrid Jute-Glass Epoxy Composites
    Dalbehera, Soma
    Acharya, S. K.
    [J]. ADVANCES IN POLYMER TECHNOLOGY, 2018, 37 (01) : 240 - 246
  • [8] Mechanical properties of nano titanium oxide particles - hybrid jute-glass FRP composites
    Seshanandan, G.
    Ravindran, D.
    Sornakumar, T.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2016, 3 (06) : 1383 - 1388
  • [9] MECHANICAL AND THERMAL PROPERTIES OF JUTE-GLASS FIBER REINFORCED NANO COMPOSITES
    Surya, D. P.
    Munirah, A. M.
    Alamelu, S. S.
    Lau, J. C. H.
    Wei, J.
    [J]. INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 3, PTS A-C: DESIGN, MATERIALS, AND MANUFACTURING, 2013, : 1357 - 1362
  • [10] Behaviour of hybrid jute-glass/epoxy composite tubes subjected to lateral loading
    Khalid, A. A.
    [J]. 3RD INTERNATIONAL CONFERENCE OF MECHANICAL ENGINEERING RESEARCH (ICMER 2015), 2015, 100
12345