Accurate Stabilization of a 3 mW Single-Mode Output He-Ne Laser by Intermittent Frequency Offset Locking to an Iodine Stabilized He-Ne Laser

A high-power, unmodulated frequency standard laser light with low running cost is a powerful tool for industrial measurement involving laser calibration and interferometry in length and shape. To obtain such a laser light, we developed an intermittent frequency offset locked laser (IFOL laser). This laser system, composed of an iodine stabilized He-Ne laser (I2SL) and a high-powered symmetric three-mode He-Ne laser (HP-3ML, optical output=5 mW), provides two stabilization operational modes: (1) independent mode (I-mode) and (2) slave mode (S-mode). Utilizing the frequency pulling effect, HP-3ML is stabilized at the condition of symmetric three-mode oscillation, and a 3 mW single-mode light with frequency instability of 10-12 is obtained (I-mode). When the optical frequency deviates from the allowed limit during I-mode, HP-3ML is temporarily offset-locked to I2SL (S-mode) with frequency resettability of 10-10 and frequency instability of 10-12. After completion of the drift reset in S-mode, HP-3ML is stabilized in I-mode again, and then I2SL is turned off. In a typical case of allowed drift in ±1 MHz, repetitive operation of I-mode for 10 days and S-mode for 5 min was satisfactory. Such an intermittent operation reduces the working time of I2SL dramatically, resulting in low running cost that enables long-term use in industrial measurement.