Characterization of 2024-T351 friction stir welding joints

被引：23
|
作者：
Ali A. [1 ]
Brown M.W. [2 ]
Rodopoulos C.A. [3 ]
Gardiner S. [4 ]
机构：
[1] Department of Mechanical and Manufacturing Engineering, University of Putra, Serdang, 43400, Selangor
[2] Department of Mechanical Engineering, University of Sheffield, Sheffield, S1 1JD, Mappin Street
[3] Materials and Engineering Research Institute, Sheffield Hallam University, City Campus, Sheffield S1 1WB, Howard Street
[4] Airbus UK, New Filton House
来源：
Journal of Failure Analysis and Prevention | 2006年 / 6卷 / 4期
关键词：
Manufacturing standards; Mechanical component; Mechanical tests; Weld;
D O I：
10.1361/154770206X117559
中图分类号：
学科分类号：
摘要：
Characterization of macrostructure, microstructure, hardness, precipitate distribution, residual stress, and cyclic deformation behavior of 2024-T351 friction stir welded joints has been conducted. Inhomogeneous microparameters governing the nonuniform residual stresses and cyclic strength are discussed. The cyclic strength of the weld microregimes is controlled by grain size and distribution of precipitates achieved during the weld process. The comprehensive information of micro- and macromechanics is used to assist in understanding the mechanism that governed the fatigue crack initiation, propagation, and life of the welded joints. © ASM International.
引用
收藏
页码：83 / 96
页数：13
相关论文
共 50 条
  • [1] FATIGUE DAMAGE OF 2024-T351 ALUMINIUM ALLOY FRICTION STIR WELDING JOINTS. PART 1: CHARACTERISATION
    Ali, Aidy
    Brown, Mike W.
    Zaroog, Omar Suliman
    SURANAREE JOURNAL OF SCIENCE AND TECHNOLOGY, 2008, 15 (02): : 107 - 116
  • [2] Modelling of crack coalescence in 2024-T351 Al alloy friction stir welded joints
    Ali, Aidy
    Brown, M. W.
    Rodopoulos, C. A.
    INTERNATIONAL JOURNAL OF FATIGUE, 2008, 30 (10-11) : 2030 - 2043
  • [3] FATIGUE DAMAGE OF 2024-T351 ALUMINIUM ALLOY FRICTION STIR WELDING JOINTS. PART 2: FATIGUE DAMAGE
    Ali, Aidy
    Brown, Mike W.
    Zaroog, Omar Suliman
    SURANAREE JOURNAL OF SCIENCE AND TECHNOLOGY, 2008, 15 (04): : 261 - 270
  • [4] Fatigue of friction stir welded 2024-T351 aluminium alloy
    Booth, D
    Sinclair, I
    ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3, 2002, 396-4 : 1671 - 1676
  • [5] Effect of residual stress of friction stir welding on the fatigue life of AA 2024-T351 joint
    Zhang, Zhengwei
    Zhang, Zhao
    Zhang, Hongwu
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2015, 229 (11) : 2021 - 2034
  • [6] SIMULATION OF FATIGUE CRACK GROWTH IN FRICTION STIR WELDED JOINTS IN 2024-T351 AL ALLOY
    Golestaneh, Amirreza Fahim
    Ali, Aidy
    Voon, Wong Shaw
    Mustapha, Faizal
    Mohammadi, Mehdi Zadeh
    SURANAREE JOURNAL OF SCIENCE AND TECHNOLOGY, 2008, 15 (04): : 271 - 285
  • [7] Three dimensional simulation of fatigue crack growth in friction stir welded joints of 2024-t351 Al alloy
    Zadeh, M.
    Ali, Aidy
    Golestaneh, A. F.
    Sahari, B. B.
    JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2009, 68 (09): : 775 - 782
  • [8] Fatigue crack growth in 2024-T351 friction stir welded joints: Longitudinal residual stress and microstructural effects
    Fratini, L.
    Pasta, S.
    Reynolds, A. P.
    INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (03) : 495 - 500
  • [9] Influence of welding parameters on fracture toughness and fatigue crack growth rate in friction stir welded nugget of 2024-T351 aluminum alloy joints
    Ghahremani Moghadam, Danial
    Farhangdoost, Khalil
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016, 26 (10) : 2567 - 2585
  • [10] Analysis of self-reacting friction stir welds in a 2024-T351 alloy
    Neumann, Tomasz
    Zettler, Rudolf
    Vilaca, Pedro
    dos Santos, Jorge F.
    Quintino, Luisa
    FRICTION STIR WELDING AND PROCESSING IV, 2007, : 55 - +
12345